This is the electric powered 1/10 scale,
           Mercedes-Benz 190E 2.5-16 Evolution II On-Road Car Kit.
               This car can be used in Tamiya Official Races.

FEATURES: Chassis: TT-01 type E composite chassis-compatible with a variety of
            Tamiya Option Parts
          Drive: Four wheel shaft drive
          Electronic Speed Control: Tamiya TEU-104BK with reverse, TAMM4541
          Motor: 540 motor with pre-attached leads
          Ball Bearings: Installed in differentials, bushings in wheel hubs
          Shocks: Friction, plastic body
          Gearbox: Sealed, front and rear
          Differentials: Bevel gear, bushing equipped
          Transmission: Single speed
          Body: Clear untrimmed, with window mask and body trim decals
          Tires: Treaded 1.0" (26mm) wide, 2.6" (65.5mm) diameter
          Wheels: 6-spoke gray 2.0" (52mm) outer diameter, 1.0" (26mm) wide
            and set of silver lace pattern 0.94" (24mm) wide, 2.0" (52mm)
            diameter wheels with +2° offset
          Bumper: Front foam
          Suspension: Independent double wishbone
          Camber: Non-adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Caster: Non-adjustable, caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Steering: Bell-crank type with servo saver

INCLUDES: Mercedes-Benz 190E 2.5-16 kit, 540 motor, ESC, clear body, tires,
            foam bumper, 19 tooth pinion gear, 61 tooth spur gear, window mask
            decals, two sets of wheels and instruction manual

REQUIRES: Radio: 2-channel with one standard servo
          Radio Batteries: 8 AA size (for transmitter)
          Battery: 6-cell stick pack with standard connector
          Charger: AC/DC timed or peak for 6-cell battery
          Misc. Items: Building and track equipment

SPECS:     VEHICLE--
          Length:    15.7" (400mm)
          Width:      7.2" (183mm)
          Height:     5.5" (140mm)
          Wheelbase:  9.9" (251mm)
             BODY-
          Length:    17.3" (439mm)
          Width:      6.9" (176mm)
          Height:     4.4" (112mm)

COMMENTS: For replacement, or to upgrade to Ball Bearings use:
            Qty.  Size      Location               Qty.    Bearing Set
             2   5x11mm     Front Hubs              1       DTXC1547
             2   5x11mm     Rear Hubs               1       DTXC1547
             2   8x12mm     Front Diff              1       DTXC1581
             2   8x12mm     Rear Diff               1       DTXC1581
             2   5x11mm     Fr Driveshaft Joint     1       DTXC1547
             2   5x11mm     Rear Driveshaft Joint   1       DTXC1547

          Body shown on box is painted black.

                                                                   jxs 05/17/11
                                                                         ir/jxs