Black Baron Film is a Patented, Flexible High-Gloss Polyester that is
                   Inexpensive, Easy, Clean and Quick To Use.
  This is Applied at Low-Temperature Onto Foam, Fiberglass and Most Plastics.

FEATURES: Super Strong with a Tensile Strength of 25,000 psi (pounds per
            square inch)
          Light-Weight At Only .25 ounces per square foot
          Dry Adhesive Is Activated When Heat Is Applied
          Shrinks To A Drum-Tight Finish As It Cools
          Molds Crease Free Around Compound Curves and Into Corners
          High Gloss Finish, Fuelproof, and Waterproof
          Stronger and Lighter Than Traditional Silk and Dope Coverings
          May Be Cleaned with Glass Cleaner or MonoKote Cleaner/Polish

INCLUDES: One Roll (6' x 27") White, Black Baron Film Covering
          One Instruction Sheet

REQUIRES: Sealing Iron (COVR2550), Iron Sock (TOPR2175), Heat Gun (TOPR2000).

COMMENTS: For Covering Balsa At High-Temperature, Suggest (COVQ0201 COVQ0215).
          Black Baron Can Be Used On Top Of High Temperature Covering, But Not
            Under.

          Note: Different Dye Lots Of BlackBaron Paints and Films, May Vary
            Slightly In Color Between Production Runs Of These Products.
          Black Baron Paint
          Black Baron 15' Film
            (If Using 3 or More Rolls of the Same Color, Suggest a 15' Roll
             to Ensure the Same Dye Lot for the Entire Plane.)

          Temperature Range:
            Attaching To Foam (Activating The Glue): 150-235°F

                                                                    JAL 8/24/98
                                                                          ir/jl