This is the Castle Creations 1/10th SV2 Sidewinder Speed Control
and CM36-6900 kV Brushless Motor 1/10 Scale Power System.
FEATURES: For 1/10 buggy and truggy applications that weigh less than 5lbs
4.0mm motor connectors, on-off switch, and universal receiver plug
Castle Link compatible
Low voltage cut-off
Dead band set-up to adjust thrrottle "width) of the controller
Drag break to set the amount of brake applied at neutral
Punch/Traction control to set how fast the throttle position within
the ESC can be changed over time
Reverse adjustment
Brake adjustment
Brake/Reverse type can be set for reverse Lockout, Forward/Brake
only, or Forward/Brake/Reverse set-up.
INCLUDES: Castle Creations Sidewinder Electronic Speed Control
CM36-6900 kV Brushless Motor
Decal Sheet
REQUIRES: Aftermarket pinion and spur gears depending on application. Stock
gearing should NOT be used with this power system. Contact Castle
Creations for further information
SPECS: Electronic Speed Control-
Max Cells: 10 cell NiCd/NiMH, 3 cell LiPo
Brake settings: 25%, 50%(default), and 75% power
Reverse Amount: 25%, 50%(default), and 75% Power
Drag Brake: Off(default), 10%, 20%, 30%, and 40%
Dead Brake settings: .1500ms, .1000ms(default), .0750ms, .0500ms
and .0250ms
Cutoff Voltage: None, Auto LiPo 3.0V per cell (default), 3.5V, 4.6V
and 9.0V and 12.0V
CM 36-6900kV
Input Voltage: 6-8 cell NiCd/NiMH max OR 2S LiPo max
Size 1.41" (35.5mm) diameter, 1.99" (50mm) length
Shaft Diameter: 1/8" (3.2mm)
Continous Watts: 1000W
Peak Watts: 1000W
Connector Type: 4mm gold: 4mm gold
Motor Wire Length: 4" (101mm) OK to shorten
JAW 2/25/11
ir/jxs
updt jxs 03/29/11
| 
