This is the radio controlled, electric powered ready-to-run, 1/12 scale
                     Desert Trophy Desert Truck from HPI.

FEATURES: Chassis: Nylon tub with inner roll cage
          Drive: Four wheel shaft
          Radio: HPI TF-1 27MHz 2-channel pistol grip with SF-1 steering servo
          Motor: HPI Firebolt 540 size, 15 turn
          Electronic Speed Control: HPI SC-15 with reverse (HPIM0341)
          Differential: Metal planetary gears
          Spur Gear: Composite construction 87 tooth, 48 pitch
          Pinion Gear: Steel construction 18 tooth, 48 pitch
          Ball Bearings: Full set
          Shocks: Composite body, oil-filled
          Body: Three-piece painted and trimmed with race team graphics,
            realistic interior with two driver figures and two non-functional
            spare tires in bed of truck
          Suspension: 4-wheel independent with aluminum front and rear uprights
          Tires: Licensed Yokohama Geolander 1.3" (34mm) wide, 3.7" (94mm)
            diameter with foam inserts
          Wheels: Matte chrome finish 1" (26mm) wide, 2.2" (54mm) diameter
            12mm hex
          Bumpers: Front and rear skid plate type
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Non-adjustable, camber refers to the angle of the tops of
            the tires from vertical when viewed from front or behind vehicle
          Warranty: Two year limited through HPI beginning at date of purchase.
            Warranty valid only in the USA, Canada and South America.

INCLUDES: RTR Desert Trophy Desert Truck, 27MHz radio, steering servo, motor
            ESC, body and instruction manual

REQUIRES: Battery: 6-cell NiMH stick pack with Standard connector
          Battery Charger: NiMH compatible, peak type
          AA Batteries: Eight for transmitter

SPECS:      Vehicle;
          Length:    21.12" (539mm)
          Width:      9"    (229mm)
          Wheelbase: 12.3"  (312mm)
          Height:     6.25" (159mm)
            Body;
          Length:    18"    (457mm)
          Width:      6.8"  (174mm) behind front wheels, narrowest point
                      8.3"  (210mm) at front fenders, widest point
          Height:     5.1"  (130mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location               Qty.    Bearing Set
             2  10x15mm    Fr Uprights              1       DTXC1595
             2  5x11mm     Fr Uprights              1       DTXC1547
             2  5x11mm     Fr Diff                  1       DTXC1547
             2  5x11mm     Rear Diff                1       DTXC1547
             1  5x11mm     Spur Gear Assembly       1       DTXC1547
             1  10x15mm    Spur Gear Assembly       1       DTXC1595
             2  10x15mm    Rear Uprights            1       DTXC1595
             2  5x11mm     Rear Uprights            1       DTXC1547

                                                                   jxs 07/07/10
                                                                         ir/jxs