Associated 1/10 SC10 RS Pro Comp 2.4GHz RTR

Tower Stock# LXBHBT  •  Manufacturer Stock# 7048
Associated 1/10 SC10 RS Pro Comp 2.4GHz RTR (large view)
Notes from our tech department:
This is the electric powered, 2.4GHz radio controlled, 1/10 scale, ready to run
SC10 RS (Race Spec) Short Course Race Truck
with Pro Comp Body Trim from Associated.
New upgrades from the previous version (#7043) include;
**High-Power Water-Resistant XP SC700 Brushless Speed Control with DeansŪ**
Ultra PlugŪ battery connector
**Water-resistant enclosed receiver box**
**Blue anodized aluminum V2 coil-over shocks**

FEATURES

Chassis: Molded composite low CG design with side nerf bars,
hinged battery hold down strap fits NiMH and LiPo battery packs
Drive: Rear wheel with steel rear dogbone drive shafts
Motor: Associated Reedy 3300kV brushless
Radio: Associated XP3-SS 2.4GHz 3-channel system with metal gear
steering servo
ESC: Associated XP SC700 brushless compatible with LiPo cutoff and
Deans Ultra Plug battery connector
Shocks: V2 oil-filled with blue aluminum bodies
Body: 0.040" (1mm) thick painted and trimmed
Differential: Sealed, planetary gear
Spur Gear: 87 tooth
Slipper Clutch: Dual sided, externally adjustable
Wheels: KMC style, 3" (76mm) diameter, 1.6" (41mm) wide, black in
color
Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm)
diameter, 1.7" (43mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis, includes Factory Team Arm Mounts (ASCC7487) that allow
four choices of rear toe-in for different track conditions
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Bumpers: Front and rear with functional rear rubber mud flaps
Ball Bearings: 14 rubber sealed
Suspension: Fully adjustable with steel turnbuckles
Steering: Angled bellcrank "coplanar" steering with integral servo
saver

INCLUDES

SC10 RS Short Course Race Truck from Associated with tires, wheels,
ESC, painted body, brushless motor, 2.4GHz radio instruction
manual

REQUIREMENTS

Battery: 6-7 cell NiMH stick pack or 2-cell LiPo pack
Battery Charger: Depending on selected battery type
Transmitter Batteries: Eight AA-size
Building and track equipment

SPECIFICATIONS

Vehicle-
Length: 21.6" (550mm)
Width: 11.5" (293mm)
Track: 9.6" (245mm)
Weight: 4.6lbs (2080g)
Wheelbase: 12.9" (327mm)
Internal Gear Ratio: 2.6:1
Body-
Length 21.6" (550mm)
Width 11.5" (293mm) at front fenders, widest point
8.8" (224mm) at center section, narrowest point
Height: 6" (153mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Transmission 1 DTXC1561
2 3/16 x 3/8" Transmission 1 DTXC1423
2 3/16 x 3/8" Idler Gear 1 DTXC1423
4 3/16 x 3/8" Rear Hubs 2 DTXC1423
4 3/16 x 3/8" Front Hubs 2 DTXC1423

Brushless powered SC10s RSs are available with the following paint
schemes;
Monster Energy, ASCC7047
Pro Comp, ASCC7048
Rockstar/Makita, ASCC7049
Lucas Oil, ASCC7050

jxs 05/04/11
ir/jxs

Resources
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐