This is the 11.1V 1050mAh 3S LiPo Battery Pack for use with the
AXE CP Helicopter from Heli-Max, HMXE0810.
FEATURES: Replaces worn or damaged battery packs
16 AWG wire leads with Deans Ultra Female connector
INCLUDES: 11.1V 1050mAh LiPo with Deans Ultra Plug and Balancing Connector
REQUIRES: LiPo Charger, HMXP1004
SPECS: Length: 2.1" (53.3mm)
Width: 1.2" (30mm)
Height: 1.2" (30mm)
Weight: 3.3oz (95g)
COMMENTS: Never charge in excess of 4.20V per cell.
If the battery should become damaged, discard the battery. Do not
attempt to use a damaged battery.
Disconnect the battery from the charger and carefully move the
battery to a fireproof location if the battery begins to
swell or smoke!
Never charge at currents greater than 1C.
Always charge in a fireproof location.
Never trickle charge.
Never allow the battery temperature to exceed 150° F (65°C).
Never disassemble or modify pack wiring in any way or puncture cells.
Never discharge below 2.75V per cell.
Do not place the battery on a flammable surface or near a
combustible material while in use.