This is the radio controlled, electric powered,
                   DogFighter Airplane Kit from Multiplex.
                    For intermediate to advanced fliers.

FEATURES: Construction: Elapor foam
          Wing: One-piece, detachable for easy transport
          Aileron Control: Dual servo
          Spinner: Elapor foam, 2.5" (63.5mm) diameter, black in color
          Decals: Two sheets, "Racer" or "Fighter" designs

INCLUDES: DogFighter Airplane Kit with Spinner, two Decal Sheets, Linkages,
            Hardware and Instruction Manual

REQUIRES: Radio: 6-channel
          Servos: Three micro (2-aileron, 1-elevator) one for optional rudder
            control if desired
          Extensions: Two 6" (150mm)
          Motor: Brushless, Multiplex makes a Brushless Motor Power Pack
            (MPUM9250) that includes a Himax Outrunner Brushless Motor with
            Mounting Hardware, ESC and 10x7 prop specifically for this kit
            Note, if using this Power Pack, three 4mm Female Bullet Connectors
            (GPMM3119) must be soldered to the ESC motor leads to connect the
            ESC to the existing connectors on the motor
          Battery: 3S LiPo, at least 2200mAh
          Battery Charger: Comptible with selected battery
          Connector for ESC to mate with selected battery, see COMMENTS
          Field equipment

SPECS:    Wingspan: 35" (889mm)
          Wing Area: 296 sq in (19.12 sq dm)
          Wing Loading: 14.6oz/sq.ft (42.7g/sq.dm)
          Fuselage Length: 32" (813mm)
          Weight: 30oz (850.4g)
          Center of Gravity (CG): 2.7" (68mm) from the leading edge of the
            wing at the fuselage side
          Control Throws-
            Elevator, Up and Down: 0.27" (7mm)
            Rudder, Left and Right: 0.79" (20mm)
            Ailerons, Up 0.55" (14mm), Down 0.31" (8mm)

COMMENTS: When using the recommended FlightPower LiPo battery, solder a Deans
            Male Ultra plug, WSDM1302 to the ESC. This connector will plug into
            the Ultra Female plug on the FlightPower battery.

          This model is NOT made of styrofoam and it is not possible to glue
            Elapor foam using white or epoxy glue. Medium CA glue used with
            an activator is the only method of gluing recommended by the
            manufacturer.

                                                                   jxs 09/28/11
                                                                         ir/jxs