TrakPower LiPo 2S 7.4V 5400mAh 60C Hard Case Saddle

Tower Stock# LXBJPP  •  Manufacturer Stock# TKPC0420
TrakPower LiPo 2S 7.4V 5400mAh 60C Hard Case Saddle (large view)
Shipping Restricted ItemDetails
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
This is the TrakPower 7.4V 5400mAh 60C LiPo Saddle Pack.

FEATURES

Ideal for 1/10 scale off-road 4WD buggies

INCLUDES

Two 3.7V Modules, Jumper Lead with 4mm Male Bullets to wire the two
modules in series and 2mm Female Bullet for Balancing

REQUIREMENTS

LiPo compatible charger and balancer

SPECIFICATIONS

Rated Pack Voltage: 7.4V (each module is 3.7V)
Capacity: 5400mAh
Max Recommended Charge Current: 1C (5.4A)
Continuous Discharge: 60C (336 amps)
Watt Hours: 40
Pack Dimensions: 0.9 x 1.8 x 2.7" (25.1 x 47 x 69mm) each module
Weight: 11.3oz (321g)
Discharge Connector: 4mm Female Bullets
Balance Connector: 2.5mm Female Bullet located on jumper wire

COMMENTS

ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts

jxs 09/26/11
ir/jxs

Resources
‐ Mailing Address ‐
‐ Additional Contact Information ‐