HPI Racing 1/8 Vorza Flux HP Brushless 4WD RTR

Tower Stock# LXBNKU  •  Manufacturer Stock# 101850
HPI Racing 1/8 Vorza Flux HP Brushless 4WD RTR (large view)
Money Saving Combos
 
LZ2240
Notes from our tech department:
4This is the 2.4GHz radio controlled, brushless electric powered, ready to run
1/8 scale HPI Vorza Flux HP Buggy.

FEATURES

Chassis: 6061 aluminum 0.16" (4mm) thick, with nylon dirt guards
Drive: Four wheel shaft with sealed drivetrain
Motor: Flux Tork 2200kV brushless with aluminum case, machined
cooling fins, 5mm shaft
Pinion Gear: 15T steel
Spur Gear: 48 tooth steel
Motor Plate: 7075 aluminum 0.12" (3mm) thick with 0.31" (8mm) thick
billet machined aluminum clamps
Radio: 2.4GHz
ESC: HPI Flux Blur Brushless ESC, 6S LiPo compatible with Deans
battery connectors, 6mm bullet motor connectors and cooling fan
PC programmable, USB Programming Kit required, order HPIC0573
Shocks: Oil-filled 16mm Big Bore aluminum bodied
Shock Towers: Aluminum, 0.16" (4mm) thick
Differentials: Three with spiral cut gears, oil filled
Pinion Gear: Hardened steel 15 tooth
Main Gear: Hardened steel 48 tooth
Body: Trimmed and painted 1/8 scale buggy body with nylon wing
Battery Tray: LiPo ready with secure hook and loop straps
Suspension: Long suspension arms for stability and balance, front and
rear sway bars
Tires: HPI Proto, 1.65" (42mm) wide, 4.6" (117mm) outer diameter
Wheels: V7 black chrome 1.65" (42mm) wide, 3.27" (83mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Warranty: Two-year limited warranty through HPI beginning at date of
purchase. Warranty valid only in the USA, Canada and South America
Warranty not valid in the European Union
Steering servo: SB-5 Metal Gear Servo 11.8kg-cm 6.0V (HPIM1996)

INCLUDES

RTR 1/8 scale HPI Vorza Flux HP Buggy with Brushless Motor & ESC,
2.4GHz 2-ch Radio, Body, Wing, Tires, Wheels and Instruction Manual

REQUIREMENTS

AA Batteries: Four for transmitter
Batteries: Two 6-7 cell NiMH flat (not stick packs) at least 4000mAh
soldered packs only, no welded tabs OR
two 2S or 3S LiPo with at least 25C rating
Battery Charger: To match selected batteries
Connectors: Two Deans Female Ultra Plugs (WSDM1303) if selected
batteries do not have them
Track equipment

SPECIFICATIONS

Vehicle-
Length: 20" (508mm)
Width: 12" (205mm)
Height: 7" (178mm)
Wheelbase: 12-13/16" (325mm)
Body-
Length: 13.1" (334mm)
Width: 7.71"(196mm)
Height: 3.8" (98mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Front Differential 1 DTXC1585
2 8x16mm Rear Differential 1 DTXC1585
4 8x14mm Front Hubs 2 DTXC1583
4 8x16mm Rear Hubs 2 DTXC1585
3 6x10mm Steering 2 DTXC1561
2 8x16mm Front Diff Case 1 DTXC1585
2 8x16mm Rear Diff Case 1 DTXC1585

jxs 11/08/11
ir/jxs
updt jxs 02/05/14

Resources
See Tower Catalog page 91.
Easy RC: Cars & Trucks
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐