This is the radio controlled, electric powered, 1/12 scale
          Renault 5 Turbo Rally kit with the M-05Ra Chassis from Tamiya.

FEATURES: Chassis: M-05Ra resin monocoque design with greater ground clearance
            and suspension strokes compared to the standard M-05 chassis,
            polycarbonate skid plate and side guards
          Drive: Front wheel
          Shocks: Plastic body friction type
          Shock Towers: Composite construction
          Motor: 540 size
          Electronic Speed Control: Tamiya TEU-104BK with reverse, TAMM4541
          Gearbox: Sealed, integral with chassis
          Transmission: Single speed, ball bearing equipped
          Differential: Three bevel gear
          Body: Polycarbonate with resin driver figure
          Suspension: Four wheel independent double wishbone with rally tuned
            geometry
          Tires: Treaded rally type 0.98" (25mm) wide, 2.2" (56mm) diameter
          Wheels: Two sets same style, one gray and one gold finished 8-spoke
            0.94" (24mm) wide, 1.5" (38mm) diameter
          Camber: Non-adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Steering: Three piece adjustable tie-rod linkage

INCLUDES: M-05Ra chassis, tires, wheels, decals, clear body, 16T pinion gear
            shocks, ESC, 540 motor and instruction manual

REQUIRES: Radio: 2-channel
          AA Batteries: 4 or 8 depending on transmitter
          Battery: 6-cell stick with standard connector
          Battery Charger: Peak type recommended
          Building and track equipment

SPECS:      Vehicle;
          Length:   12"   (305mm)
          Width:     6.7" (170mm)
          Wheelbase: 8.3" (210mm)
          Tread:     5.4" (138mm) center of wheels, side-to-side
            Body;
          Length:   12"   (305mm)
          Width:     7.1" (180mm)
          Height:    3.9" (99mm)

COMMENTS: For Replacement or to Upgrade To Ball Bearings use:
            Qty.  Size      Location                  Qty. Bearing Set
             1   5x8mm    Counter Gear                 1   DTXC1523
             1   5x11mm   Counter Gear                 1   DTXC1547
             1   5x8mm    Spur Gear                    1   DTXC1523
             1   5x11mm   Spur Gear                    1   DTXC1547
             2   5x11mm   Output Shaft                 1   DTXC1547
             2   5x11mm   Front Axles                  1   DTXC1547
             2   5x11mm   Rear Axles                   1   DTXC1547

                                                                   jxs 10/06/11
                                                                         ir/jxs