HPI Racing 1/10 Bullet MT Flux RTR

Tower Stock# LXBPVV  •  Manufacturer Stock# 107010
HPI Racing 1/10 Bullet MT Flux RTR (large view)
Notes from our tech department:
This is the brushless electric powered, 2.4GHz radio controlled, ready to run
1/10 scale Bullet MT Flux Monster Truck from HPI.

FEATURES

Chassis: 6061 aluminum double deck 0.12" (3mm) thick
Drive: Four wheel shaft, with steel outdrives and axles
Motor: HPI Flux Shot brushless with black anodized heatsink case
ESC: HPI Flux Reload waterproof, brushless with Deans battery plug
and cooling fan, can be customized with the #101280 PC Professional
Program Card (not included)
Radio: 2-channel 2.4GHz with waterproof steering servo
Electronics Compartment: Waterproof
Differentials: Bevel Gear type with four internal gears for increased
durability
Shocks: Eight oil-filled with captured type mounting on suspension
arm for extra durability
Suspension: Extra long arms for greater stability and thick
suspension pins for greater resistance against crash damage
Spur Gear: 54 tooth plastic
Slipper Clutch: Double pad design for extra drivetrain protection
Body: Painted and trimmed
Bumpers: Front and rear, plastic construction
Tires: All terrain 2.6" (67mm) wide, 4.8" (124mm) diameter
Wheels: Five Spoke black chrome finish, 14mm hex, 2.2" (56mm) wide
3.2" (82mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Ball Bearings: Full set
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Warranty: Two year limited beginning at date of purchase. Valid only
in US, Canada and South America. Not intended for use in the EU.

INCLUDES

Bullet MT Flux Monster Truck with 2-channel 2.4GHz Radio, Brushless
Motor, ESC, painted Body, 4 AA Cells and Instruction manual

REQUIREMENTS

Battery: 7.2V NiMH 6-cell stick pack or 7.4V LiPo battery with Deans
Ultra Female connector
Battery Charger: To match selected battery
Maintenance and Track equipment

SPECIFICATIONS

Vehicle-
Length: 16.4" (417mm)
Width: 13.2" (336mm)
Height: 6.3" (160mm)
Track: 10.3" (263mm) outer edges of tires side-to-side
Wheelbase: 10.7" (272mm)
Body-
Length: 16.3" (415mm)
Width: 6.7" (171mm)
Height: 4.8" (122mm)

COMMENTS

For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Spur Gear 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 5x10mm Fr Diff Case 1 DTXC1535
2 5x10 Rear Diff Case 1 DTXC1535
4 5x10mm Fr Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535

jxs 09/19/11
ir/jxs
updt jxs 02/05/14

Resources
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐