HPI Racing 1/8 Trophy 3.5 Buggy Nitro RTR

Tower Stock# LXBPVW  •  Manufacturer Stock# 107012
HPI Racing 1/8 Trophy 3.5 Buggy Nitro RTR (large view)
Notes from our tech department:
This is the glow powered, 2.4GHz radio controlled, ready to run
1/8 scale Trophy 3.5 Rallycross Buggy from HPI.


Chassis: 6061 aluminum 0.12" (3mm) thick with front and rear metal
rod braces
Drive: Four wheel shaft, with steel outdrives and axles
Engine: HPI Nitro Star F3.5 .21 cu in, 2.5hp race legal, pull starter
two-stage air filter with splash guard to prevent engine from
getting flooded with water in wet conditions, composite 2-needle
carb, ABC construction and large heatsink for efficient heat
Radio: 3-channel 2.4GHz with end point adjustment, servo reversing,
steering dual rate, failsafe and waterproof servos for steering
and throttle
Radio Tray: Low profile aluminum
Fuel Tank: 5.4oz (160cc)
Differentials: Bevel Gear type with four internal gears for increased
Shocks: Oil-filled aluminum body
Shock Towers: 6061 aluminum
Brake: Dual drilled steel discs with fiber brake pads
Suspension: Extra long arms for greater stability and thick
suspension pins for greater resistance against crash damage
Spur Gear: 46 tooth steel
Steering: Bellcrank type with cast aluminum knuckles and servo saver
Steering servo: SF-10W Servo, waterproof/4.5kg-cm6.0V (HPIM4105)
Body: Painted and trimmed, black rear wing
Bumpers: Front plastic
Wheels: Seven spoke black in color, 1.6" (42mm) wide, 3.1" (80mm)
Tires: Team HB Proto with large lugs for high traction, 1.6" (41.8mm)
wide, 3.1" (79mm) inner diameter
Ball Bearings: Full set
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Warranty: Two year limited, valid only in the USA, Canada and South


RTR 1/8 scale Trophy 3.5 Rallycross Buggy, .21 cu in Engine w/Pull
Starter, Body, Decals, 3-channel 2.4GHz Radio, Instructions and
eight AA batteries


Glow Fuel: Car blend with 10-20% nitro content
Glow starter
Building and track equipment


Length: 20.4" (518mm)
Width: 11.8" (300mm)
Height: 7.1" (180mm)
Track: 11" (280mm) opposite edges of tires, side-to-side
Length: 14.2" (360mm)
Width: 8.5" (215mm)
Height: 3.5" (89mm)


For replacement or to upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
2 5x10mm Clutch 1 DTXC1535
3 8x16mm Fr Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
3 8x16mm Center Diff 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Front Gearbox 1 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561

jxs 09/20/11

See Tower Catalog page 93.
Easy RC: Cars & Trucks
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐