HPI Racing 1/8 Trophy 4.6 Truggy Nitro RTR

Tower Stock# LXBPVX  •  Manufacturer Stock# 107014
HPI Racing 1/8 Trophy 4.6 Truggy Nitro RTR (large view)
Money Saving Combos
 
LZ2243
Notes from our tech department:
This is the glow powered, 2.4GHz radio controlled, ready to run
1/8 scale Trophy 4.6 Truggy Racer from HPI.

FEATURES

Chassis: 6061 aluminum 0.12" (3mm) thick with front and rear metal
rod braces
Drive: Four wheel shaft, with steel outdrives and axles
Engine: HPI Nitro Star F4.6 .28 cu in, 2.9hp, pull starter
two-stage air filter with splash guard to prevent engine from
getting flooded with water in wet conditions, composite 2-needle
carb, ABC construction and large heatsink for efficient heat
dissipation, upgradable to the Roto Start 2 for easy push button
starting (Roto Start 2 not included, order HPIP7130)
Radio: 3-channel 2.4GHz with end point adjustment, servo reversing,
steering dual rate, failsafe and waterproof servos for steering
and throttle: TF-40 transmitter (HPIL5381), RF-40 receiver
Radio Tray: Low profile aluminum
Fuel Tank: 5.4oz (160cc)
Differentials: Bevel Gear type with four internal gears for increased
durability
Shocks: Oil-filled, aluminum body
Shock Towers: 6061 aluminum
Brake: Dual drilled steel discs with fiber brake pads
Suspension: Extra long arms for greater stability and thick
suspension pins for greater resistance against crash damage
Spur Gear: 46 tooth steel
Steering: Bellcrank type with cast aluminum knuckles and servo saver
Body: Painted and trimmed
Bumpers: Plastic, tubular shaped front and rear
Wheels: Seven spoke
Tires: HPI Shredder Block
Ball Bearings: Full set
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Warranty: Two year limited, valid only in the USA, Canada and South
America

INCLUDES

RTR 1/8 scale Trophy 4.6 Truggy Racer, .28 cu in Engine w/Pull
Starter, Body, Decals, 3-channel 2.4GHz Radio, Instructions and
eight AA Batteries

REQUIREMENTS

Glow Fuel: Car blend with 10-20% nitro content
Glow starter
Building and track equipment

SPECIFICATIONS

Vehicle-
Length: 22.8" (580mm)
Width: 15.9" (405mm)
Height: 7.1" (180mm)
Track: 14.4" (365mm)
Wheelbase: 14.4" (365mm)
Body-
Length: 18.25" (462mm)
Width: 7.1" (180mm)
Height: 5.1" (130mm

COMMENTS

For replacement or to upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
2 5x10mm Clutch 1 DTXC1535
3 8x16mm Fr Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
3 8x16mm Center Diff 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Front Gearbox 1 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561

jxs 09/20/11
ir/jxs

Resources
See Tower Catalog page 91.
Easy RC: Cars & Trucks
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐