This is the glow powered, 2.4GHz radio controlled, ready to run
               1/8 scale Trophy 4.6 Truggy Racer from HPI.

FEATURES: Chassis: 6061 aluminum 0.12" (3mm) thick with front and rear metal
            rod braces
          Drive: Four wheel shaft, with steel outdrives and axles
          Engine: HPI Nitro Star F4.6 .28 cu in, 2.9hp, pull starter
            two-stage air filter with splash guard to prevent engine from
            getting flooded with water in wet conditions, composite 2-needle
            carb, ABC construction and large heatsink for efficient heat
            dissipation, upgradable to the Roto Start 2 for easy push button
            starting (Roto Start 2 not included, order HPIP7130)
          Radio: 3-channel 2.4GHz with end point adjustment, servo reversing,
            steering dual rate, failsafe and waterproof servos for steering
            and throttle: TF-40 transmitter (HPIL5381), RF-40 recvr (HPIL5383)
          Radio Tray: Low profile aluminum
          Fuel Tank: 5.4oz (160cc)
          Differentials: Bevel Gear type with four internal gears for increased
            durability
          Shocks: Oil-filled, aluminum body
          Shock Towers: 6061 aluminum
          Brake: Dual drilled steel discs with fiber brake pads
          Suspension: Extra long arms for greater stability and thick
            suspension pins for greater resistance against crash damage
          Spur Gear: 46 tooth steel
          Steering: Bellcrank type with cast aluminum knuckles and servo saver
          Body: Painted and trimmed
          Bumpers: Plastic, tubular shaped front and rear
          Wheels: Seven spoke
          Tires: HPI Shredder Block
          Ball Bearings: Full set
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to
            the chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle
          Warranty: Two year limited, valid only in the USA, Canada and South
            America

INCLUDES: RTR 1/8 scale Trophy 4.6 Truggy Racer, .28 cu in Engine w/Pull
            Starter, Body, Decals, 3-channel 2.4GHz Radio, Instructions and
            eight AA Batteries

REQUIRES: Glow Fuel: Car blend with 10-20% nitro content
          Glow starter
          Building and track equipment

SPECS:      Vehicle-
          Length:    22.8" (580mm)
          Width:     15.9" (405mm)
          Height:     7.1" (180mm)
          Track:     14.4" (365mm)
          Wheelbase: 14.4" (365mm)
            Body-
          Length:    18.25" (462mm)
          Width:      7.1"  (180mm)
          Height:     5.1"  (130mm

COMMENTS: For replacement or to upgrade to ball bearings use:
            Qty.  Size      Location        Qty.      Bearing Set
             2   5x10mm      Clutch          1         DTXC1535
             3   8x16mm      Fr Diff         2         DTXC1585
             3   8x16mm      Rear Diff       2         DTXC1585
             3   8x16mm      Center Diff     2         DTXC1585
             2   8x16mm      Rear Gearbox    1         DTXC1585
             2   8x16mm      Front Gearbox   1         DTXC1585
             4   8x16mm      Rear Hubs       2         DTXC1585
             4   8x16mm      Front Hubs      2         DTXC1585
             4   6x10mm      Steering        2         DTXC1561

                                                                   jxs 09/20/11
                                                                         ir/jxs