HPI Racing 1/8 Trophy Buggy Flux RTR

Tower Stock# LXBPVY  •  Manufacturer Stock# 107016
HPI Racing 1/8 Trophy Buggy Flux RTR (large view)
Notes from our tech department:
This is the brushless electric powered, 2.4GHz radio controlled, ready to run
1/8 scale Trophy Flux Buggy Racer from HPI.


Chassis: 6061 aluminum 0.16" (4mm) thick with front and rear metal
rod braces
Drive: Four wheel shaft, with steel outdrives and axles
Motor: Flux Scream brushless 1965kV
ESC: Flux Rage, handles two 2S batteries for up to 4S (14.8V) of
Radio: 2-channel 2.4GHz, waterproof servo for steering
Radio Tray: Low profile aluminum
Differentials: Bevel Gear type with four internal gears for increased
Shocks: Oil-filled, aluminum body
Shock Towers: 6061 aluminum
Suspension: Extra long arms for greater stability and thick
suspension pins for greater resistance against crash damage
Steering: Bellcrank type with cast aluminum knuckles and servo saver
Body: Painted and trimmed
Bumpers: Front plastic
Wheels: Seven spoke 1.6" (41.8mm), 2.4" (60mm) diameter, 17mm hex
Tires: Hot Bodies Proto, 1.6" (40mm) wide, 4.3"(110mm) diameter
Ball Bearings: Full set
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Warranty: Two year limited, valid only in the USA, Canada and South


RTR 1/8 scale Trophy Flux Buggy Racer with Brushless Motor, ESC,
Body, Decals, 2-channel 2.4GHz Radio, 4 AA Batteries and
Instruction Manual


Batteries: Two 2S LiPo batteries with Deans plugs
Battery Charger: For selected batteries
Maintenance and track equipment


Length: 20.3" (518mm)
Width: 11.8" (300mm)
Height: 7.1" (180mm)
Wheelbase: 13.1" (333mm)
Track: 11" (280mm) outer edges of tires, side-to-side
Length: 13.1" (333mm)
Width: 7.9" (200mm) at widest point
Height: 4" (102mm)


For replacement or to upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
3 8x16mm Fr Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Front Gearbox 1 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561

jxs 09/20/11
updt jxs 02/05/14

See Tower Catalog page 91.
Easy RC: Cars & Trucks
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐