This is the 2.4GHz radio controlled, glow powered, ready to run,
                             D8S Buggy from HPI.

FEATURES: Chassis: 0.16" (4mm) thick 7075 aluminum with centralized weight
            balance and cutouts under servos, engine and clutch bell to reduce
            weight, composite chassis braces
          Drive: Four wheel shaft with high strength steel driveshafts and
            axles
          Engine: HPI Nitro Star F3.5 .21 cu in with pull starter and foam air
            filter
          Exhaust: Aluminum tuned pipe
          Radio: HPI 2.4GHz TF-40 3-channel pistol grip with drop down steering
            wheel, end point adjustments, servo reverse, steering dual rate,
            built-in fail safe, SB-5 metal gear steering servo and SF-10
            waterproof throttle/brake servo
          Ball Bearings: Full set rubber sealed
          Differentials: Oil filled spiral cut diff gears
          Suspension: Fully adjustable, solid composite suspension arms,
            machined aluminum mounts
          Shocks: 16mm Big Bore silicone oil-filled with threaded aluminum
            bodies
          Shock Towers: Aluminum 0.16" (4mm) thick
          Body Trimmed and painted with rear wing
          Tires: 1.6" (40mm)wide, 4.3" (110mm) outer diameter
          Wheels: Black chrome with 17mm hexes
          Brake: Dual fiber disc with easily adjustable linkage and drilled
            for low rotating mass and extra cooling
          Fuel Tank: 5.1oz (150cc) with clunk that helps engine stay running if
            buggy flips upside down
          Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
            angle of the front suspension when viewed from the side of the car
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Inverse steering block design, dual bellcrank with aluminum
            drag link and cam type servo saver
          Warranty: Two year limited warranty beginning at date of purchase.
            Warranty valid only in the US, Canada and South America

INCLUDES: RTR D8S Buggy with engine, 2.4GHz radio system, painted body,
            instruction manual, four AA cells, 5-cell receiver hump pack, wall
            charger, glow starter with C-cell battery, Wrench

REQUIRES: Glow Fuel: 2-stroke glow fuel w/10%-20% nitromethane, 16% lubricant
          Building and track equipment

SPECS:      Vehicle-
          Length: 19.7" (500mm)
          Width:  12"   (305mm)
          Height: 7"    (179mm)
          Wheelbase: 12.6" (320mm) adjustable
          Tread: 10.2" (260mm) distance from center of tires side to side
            Body-
          Length: 13.1" (334mm)
          Width:   7.4" (187mm)
          Height:  2.7" (70mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location               Qty.    Bearing Set
             4  8x14mm      Front Hubs              2       DTXC1583
             2  8x16mm      Diff Mount              1       DTXC1585
             4  8x16mm      Rear Hubs               2       DTXC1585
             4  8x16mm      Differentials           2       DTXC1585
             2  8x16mm      Diff Case               1       DTXC1585
             2  5x11mm      Clutch Bell             2       DTXC1547
             4  6x10mm      Steering                2       DTXC1561

                                                                   jxs 10/14/11
                                                                         ir/jxs