This is the Novak Eiger 2S/3S Brushed Electronic Speed Control
       and the Rockstar 35 Turn Brushed Motor for Crawling Applications.

FEATURES:   ESC (NOVM1835);
          Compatible with all Novak brushed motors including the Terra Claw and
            Rock Star motors
          Compatible with 2-3S LiPo cells and 4-9 cell NiMH batteries
          Heavy duty 2-amp BEC
          Three throttle modes;
            Rock Crawl Mode with adjustable drag brake power
            Standard/Basher Mode for normal FWD/BRK/REV
            Robotic or Servo Mode for FWD/REV operation only
          Four adjustable parameters;
            Brake Power/Throttle Mode (5 settings)
            Dead Band (5 settings)
            Drive Frequency (5 settings)
            Voltage Cut-Off
          One-Touch programming interface with four multi-colored status LEDs
          6V output for cooling fan or other options such as running lights
          Temperature monitoring allows user to check ESC operating temperature
            at any time
          Thermal overload protection to prevent overheating
          Water-resistant case with silicone gasket seal
          One touch setup
          RoHS compliant
            Motor (NOVC3537);
          Designed for crawler vehicles that require precise movement control
          High number of turns for excellent torque and long run times
          Rebuildable with easily accessible commutator and replaceable
            brushes and springs
          Stand-up brush design
          High-strength ferrite magnet
          Dual ball bearings
          Direct solder wiring tabs for flexible soldering options
          120 day limited warranty on both components through Novak

INCLUDES: Novak Eiger Brushed ESC with Tamiya Type Battery Connector, Gold
            Plated Bullet Motor Plugs, Mounting Tape, Power Cap, Wires, Heat
            Sink, Rock Star 35 Turn Brushed Motor and Instruction Manual

REQUIRES: Pinion gear of modeler's choice
          Installing in vehicle and connecting to battery and receiver

SPECS:      ESC;
          Motor Compatibility: 380, 540 size brushed
          Input Cells: 2-3S LiPo or 4-9 NiMH
          Size: 1.15 x 0.95 x 0.66" (29.0 x 24.3 x 16.8mm)
          Weight: 0.64oz. (18.1g) without wires
          On-Resistance: 0.0013 ohms
          Motor Limit: 20T or higher (2S); 35T or higher (3S) brushed
            540 motor, and any 380 size brushed motor
          BEC: 6V DC/2A
          Wire Size: 14G Super-Flex Copper-Strand Silicone Wire
            Motor;
          Motor Size: 2.07 x 1.42" (52.7 x 36.1mm)
          Shaft Diameter: 0.125" (3.2mm) accepts all 1/8" pinion gears
          Bearing: Standard 3/8" x 1/8"
          Motor Weight: 5.97oz. (169g)

                                                                   jxs 02/23/12
                                                                         ir/jxs