Multiplex Easy Star II Kit 54"

Tower Stock# LXBVCR  •  Manufacturer Stock# M214260
Multiplex Easy Star II Kit 54
Easy Pay
Request 2 Payments ($47.50, $47.49) Details
Money Saving Combos
 
LZ2314
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is a radio controlled, electric powered, foam construction
Multiplex Easy Star II Airplane Model Kit
For Beginner to Intermediate Modeler/Fliers.

FEATURES

Construction: Elapor foam on the fuselage, wing and tail section
Wings: Two-piece, foam construction, white in color, may be built
with optional ailerons
Radio Compartment: Foam, sized for high capacity LiPo packs
Landing Gear: No landing gear, model lands on its belly
Hardware: Pushrods and other hardware included
Spinner: White plastic 1.4" (35mm)
Propeller: Plastic, folding pusher type, pro faces the rear of the
airplane
Decals: Precut colorful Easy Star II logo decals

INCLUDES

Foam fuselage, wings, and tail section, prop, spinner, decals,
instruction manual, and hardware

REQUIREMENTS

Radio: 3-channel
Servos: Two nano (rudder, and elevator control), two extra servos are
required if building with ailerons
Servo Extensions: Two 12" (305mm)
Motor: 28mm brushless outrunner with at least 200W output
ESC: Brushless compatible, to match selected motor
Battery: 3S 1500-2500mAh LiPo
Battery Charger: To match selected LiPo battery
LiPo charge bag and miscellaneous building equipment

SPECIFICATIONS

Wingspan: 54" (1370mm)
Wing Area: 435 sq in (2810 sq dm)
Wing Loading: 8.28 oz/sq ft (25.27 g/sq dm)
Weight: 25 oz (709 g)
Length: 38.5" (978mm)
Airfoil: Flat bottom, high wing configuration
Center of Gravity: 3.07" (78mm) back from the wing's leading edge
at the fuselage sides.
Control Throws-
Elevator: 0.20" (5mm) up, 0.16" (4mm) down
Rudder: Right & Left 0.39" (10mm)

COMMENTS

This model is NOT made from polystyrene foam. For this reason, it is
not possible to use white glue or epoxy glue. Use only a medium CA
(CA+) glue and activator. Do not use CA glue designed for polysty-
rene foam.

jxs 07/23/12
ir/jxs

Resources
See Tower Catalog page 25.
Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐