This is the electric powered, radio controlled, DM One-Spec e
                     On-Road Touring Car Kit from Ofna.

FEATURES: Chassis: Natural finish CNC aluminum 0.14" (3.5mm) thick, molded
            battery tray and ESC plate
          Drive: Four wheel shaft drive with front universals
          Shocks: Oil filled 13mm hard anodized, front cantilever shocks
          Differentials: Sealed, front and rear planetary gear type
          Suspension: Pivot ball, front and rear with adjustable sway bars and
            adjustable up and down stops
          Body: Clear 1/8 scale DP8 GT touring car with rear diffuser for more
            downforce
          Motor Mount: CNC aluminum
          Transmission: One-speed
          Spur Gear: Plastic, 49 tooth
          Ball Bearings: Full set
          Bumper: Front foam
          Wheels: V-spoke, 17mm hex, 1.65" (42mm) wide, 3.3 (80.5mm) diameter
          Tires: Treaded rubber, width 1.65" (42mm), outer diameter 3.93"
            (10mm) with foam inserts
          Steering: Bellcrank type with servo saver and aluminum steering rack
          Caster: Adjustable front and rear, caster/toe-in refers to the angle
            of the front suspension when viewed from the side of the car in
            relation to the chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle

INCLUDES: Ofna DM One-Spec e On Road Touring Car Kit with Tires, Foam Inserts,
            Wheels, Decals, Clear Body and Instruction Manual

REQUIRES: Radio: 2-channel with high torque steering servo
          Motor and ESC: For 1/8 scale brushless applications
          Battery: Two 4S-6S LiPo
          Battery Charger: Compatible with selected batteries
          Building and track equipment

SPECS:      Vehicle;
          Length: 21.5" (546mm)
          Width: 13.19" (335mm)
          Wheelbase: 12.76" (324mm)
          Running Weight: 8.3lbs (3765g)
            Body;
          Length: 23" (584mm)
          Width:  12.25" (311mm)
          Height:  6.4" (164mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty. Bearing Set
             2   8x16mm    Front Diff                  1    DTXC1585
             2   8x16mm    Rear Diff                   1    DTXC1585
             2   8x16mm    Front Gear Case             1    DTXC1585
             2   8x16mm    Rear Gear Case              1    DTXC1585
             2   6x10mm    Servo Saver                 1    DTXC1561
             1   8x16mm    Gear Shaft                  1    DTXC1585
             4   8x16mm    Fr Knuckle Arms             2    DTXC1585
             4   8x16mm    Rear Wheel Hubs             2    DTXC1585

                                                                   jxs 11/29/11
                                                                         ir/jxs