Associated 1/10 SC10 KMC Wheels RTR NiMH Combo

Tower Stock# LXBVKM  •  Manufacturer Stock# 7030C
Associated 1/10 SC10 KMC Wheels RTR NiMH Combo (large view)
Notes from our tech department:
This is the electric powered, radio controlled, 1/10 scale, ready to run
SC10 Short Course Race Truck with the KMC Wheel Body Trim from Associated.

FEATURES

Chassis: Molded composite low CG design with side nerf bars,
hinged battery hold down strap fits NiMH and LiPo battery packs
Drive: Rear wheel with steel rear dogbone drive shafts
Motor: Associated Reedy Radon 17 turn
Radio: Associated XP2G 2-channel pistol grip with DS1903 metal gear
steering servo, transmitter does not have charge jack
ESC: Associated XP SC550 forward/reverse with LiPo low voltage cut-
off, T-plug battery connector
Battery: Wolfpack NiMH 7.2V 3000mAh stick pack with Dean's connector
Charger: 110V AC wall type
Shocks: Oil-filled with blue aluminum bodies
Body: 0.040" (1mm) thick painted and trimmed with KMC Wheel body trim
Differential: Sealed, planetary gear
Spur Gear: 87 tooth
Slipper Clutch: Dual sided, externally adjustable
Wheels: KMC style, 3" (76mm) diameter, 1.6" (41mm) wide, black in
color
Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm)
diameter, 1.7" (43mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Bumpers: Front and rear with functional rear rubber mud flaps
Ball Bearings: 14 rubber sealed
Suspension: Fully adjustable with steel turnbuckles
Steering: Angled bellcrank "coplanar" steering with integral servo
saver

INCLUDES

SC10 Short Course Race Truck Kit from Associated with tires, wheels,
painted body, motor, battery, charger, radio and instruction manual

REQUIREMENTS

Transmitter Batteries: Six AA-size
Building and track equipment

SPECIFICATIONS

Vehicle-
Length: 21.6" (550mm)
Width: 11.5" (293mm)
Track: 9.6" (245mm)
Weight: 4.6lbs (2080g)
Wheelbase: 12.9" (327mm)
Internal Gear Ratio: 2.6:1
Body-
Length 21.6" (550mm)
Width 11.5" (293mm) at front fenders, widest point
8.8" (224mm) at center section, narrowest point
Height: 6" (153mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Transmission 1 DTXC1561
2 3/16 x 3/8" Transmission 1 DTXC1423
2 3/16 x 3/8" Idler Gear 1 DTXC1423
4 3/16 x 3/8" Rear Hubs 2 DTXC1423
4 3/16 x 3/8" Front Hubs 2 DTXC1423

jxs 11/22/11
ir/jxs

Resources
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐