This is the electric powered, radio controlled 1/10 scale
EXO 4WD Terra Buggy Kit from Axial Racing.
FEATURES: Chassis: 0.16" (4mm) 6061 aluminum with recessed pockets for lower CG
tapered to provide extra 1/2" (13mm) ground clearance
Drive: Four wheel with ball bearing supported stub axles
Motor Mount: Two-piece with adjustment screw for easy gear mesh
setting
Roll Cage: Molded composite plastic with light bar that holds up to
five LEDs with clear lenses and three types of mesh covers
(LED lights not included)
Spur Gear: 52 tooth, 32 pitch
Pinion Gear: 12 tooth, 32 pitch for 3mm motor shaft
Shocks: Oil filled, plastic body with tuned springs and double shear
with aluminum plate that keys into the molded cage for added
strength
Differentials: Three silicone oil-filled with four sintered gears
housed in compact cases allowing the use of compact and streamlined
bulkheads for reduced weight
Steering: Steel posts, aluminum steering rack and aluminum servo
saver retaining system with captured bearings, pins coated with
titanium nitride, entire system leans back 10° to match front
kickup eliminating all bumpsteer
Battery Mount: Positioned toward the center for balance, and
adjustable to fit nearly any battery pack
Body: .040" (1mm) thick clear polycarbonate separate panels with
rear diffuser/wing and four LED light buckets (LED lights not
included)
Bumpers: Front and rear, hinged to flex upon impact
Wheels: 2.2/3.0 officially licensed Raceline Renegade
Tires: Officially licensed Hankook Dynapro MT, front 1.3" (34mm)
wide, rear 1.6" (41mm) wide with internal ribbing for sidewall
support
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Ackerman: Adjustable, ackerman refers to the inner front wheels
turning faster than the outer front wheels during turns
Warranty: Axial Racing warrants this kit to be free from defects in
materials and workmanship when new. This warranty does not cover
damages due to normal wear and tear, user's failure to perform
routine maintenance, user error of assembly or installation, user
modifications, or addition of aftermarket parts or option parts.
INCLUDES: EXO 4WD Terra Buggy Kit, with body panels, bumpers, wheels, tires,
foam inserts, pinion gear, spur gear, full color decals and
instruction manual
REQUIRES: Radio: 2-channel with high torque steering servo
Motor: Brushless, 540 or 550 size
ESC: To match selected brushless motor
Transmitter Batteries: AA size, four or eight depending on TX
Battery: 6-cell NiMH or 2S LiPo, max size 149 x 35 x 52mm
Charger: To match selected battery
Building and track equipment
SPECS: Length: 19" (482.6mm)
Width: 11.6" (295.3mm)
Height: 9" (228.6mm)
Ground Clearance: 3" (76.2mm)
Weight (no electronics): 4.9lbs (2.22kg)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm F Bevel Gear Assembly 1 DTXC1595
2 10x15mm R Bevel Gear Assembly 1 DTXC1595
2 5x14mm Bulkhead 1 AXIC0221
2 10x15mm Steering Knuckles 1 DTXC1595
2 5x10mm Steering Knuckles 1 DTXC1535
2 10x15mm Rear Hubs 1 DTXC1595
2 5x10mm Rear Hubs 1 DTXC1535
2 10x15mm Spur Gear 1 DTXC1595
4 4x7mm Steering 2 DTXC1507
jxs 11/07/11
ir/jxs
| 
Primary Accessories
Primary Accessories
