Ofna 1/8 Ultra LX2e 2.4GHz RTR

Tower Stock# LXBWUV  •  Manufacturer Stock# 34301
Ofna 1/8 Ultra LX2e 2.4GHz RTR (large view)
Notes from our tech department:
This is an 1/8 scale electric powered, 2.4GHz radio controlled,
ready to run Ultra LX-2E Off-Road Buggy Kit.


Chassis: CNC machined 0.12" (3mm) thick with hard anodized aluminum
front and center top plates, plastic stone guards and front and
rear braces
Drive: Four wheel shaft
Motor: 1900kV brushless
Motor Mount: One-piece CNC aluminum
Radio: 2.4GHz FHSS 3-channel with steering dual rate, end point
adjustments, 3rd auxiliary channel, throttle and steering trim &
reverse, transmitter has charge jack, high-torque steering servo
Electronic Speed Control: 90A brushless compatible with cooling fan
Ball Bearings: Rubber sealed
Shocks: Oil-filled 16mm Big Bore, hard coated aluminum body
Shock Towers: Aluminum
Pinion Gear: 14 tooth
Spur Gear: Lightweight composite 51 tooth
Differentials: Planetary geared
Tires: Triad racing with foam inserts 1.7" (43mm) wide, 4.4" (112mm)
Wheels: White dish type 2.4" (61mm) diameter, 1.6" (41mm) wide,
17mm hex
Body: Painted and trimmed, high downforce wing
Suspension: Front C-hub, front and rear sway bars
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Steering: Bellcrank type with servo saver


RTR Ofna Ultra LX-2e Buggy, brushless motor, 90A ESC, 2.4GHz radio,
painted body, wing, decals, tires, wheels and instruction manual


AA Batteries: Eight for transmitter
Battery: Two 7.4V LiPo with Deans female plug
Battery Charger: LiPo compatible
Building and track equipment


Length: 19.5" (495mm)
Width: 11.7" (298mm)
Weight: 6.2lbs (2812g)
Wheelbase: 12.9" (330mm)
Length: 14.7" (374mm)
Width: 7.9" (200mm) at widest point
Height: 4.2" (108mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 7x19mm Front Diff 1 DTXC1579
2 7x19mm Rear Diff 1 DTXC1579
2 7x19mm Center Diff 1 DTXC1579
2 6x13mm Fr Gear Case 1 DTXC1573
2 6x13mm Rear Gear Case 1 DTXC1573
4 8x16mm Fr Knuckle Arms 2 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585

jxs 02/06/12

Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐