This is the 2.4GHz radio controlled, glow powered, 1/8 scale, ready to run
                         Nexx 8T Truggy from Ofna.

FEATURES: Chassis: 0.14" (3.5mm) thick hard coated aluminum with front and rear
            stiffeners and rear skid plate
          Drive: Four wheel shaft
          Differentials: Three oil filled, bevel gear type
          Radio: 2.4GHz Direct Sequence 3-channel, throttle and steering end-
            point adjustments, dual rate steering, high-torque metal gear
            steering servo and throttle fail safe
          Engine: .32 cu in (5.2cc) with pull starter, foam air filter, slide
            valve carburetor, B4 hot heat range glow plug and CNC machined
            engine mounts
          Exhaust: Polished aluminum tuned pipe
          Clutch: 3-shoe composite construction
          Clutch Bell: 13T steel
          Spur Gear: 48T steel
          Fuel Tank: 5oz (150cc)
          Shocks: Aluminum body, oil filled, 16mm
          Shock Towers: 0.16" (4mm) thick aluminum
          Bumper: Front, composite
          Suspension: C-hub with front and rear adjustable swaybars
          Body: Trimmed and painted, heavy duty rear wing
          Tires: Rectangular tread, 2.6" (66mm) wide, 5.5" (141mm) diameter
          Wheels: LPR 1/2 offset, 3.9" (100mm) diameter, 2.28" (58mm)
            wide, 17mm hex, yellow in color
          Steering: Bellcrank bushing equipped type with servo saver and
            adjustable Ackerman, Ackerman describes the effect of the inner
            front wheel turning faster that the outer front wheel during turns
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Ball Bearings: Full set sealed

INCLUDES: RTR Nexx 8T Truggy with 2.4GHz 3-ch Radio, High Torque Servo, .32
            Engine w/Pull Starter, Glow Plug, Painted Body with Wing, Fuel
            Bottle, D-Cell Glow Starter and Instructions

REQUIRES: AA Batteries: Eight for transmitter
          D Size Battery: For glow starter
          Fuel: 2-cycle car blend glow fuel with 20% nitromethane
          Track and maintenance equipment

SPECS:      Vehicle-
          Length: 22" (559mm)
          Width: 14.5" (370mm)
          Wheelbase: 16.75" (425mm)
          Weight: 9.4lbs (4263g)
            Body-
          Length: 16.7" (425mm)
          Width:   7.7" (195mm)
          Height: 5" (127mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                      Qty  Bearing Set
             2   8x16mm    Front Diff                      1    DTXC1585
             2   8x16mm    Rear Diff                       1    DTXC1585
             2   8x16mm    Center Diff                     1    DTXC1585
             2   8x16mm    Front Gear Case                 1    DTXC1585
             4   8x16mm    Front Knuckle Arms              2    DTXC1585
             4   8x16mm    Rear Wheel Hubs                 2    DTXC1585
             2   5x10mm    Clutch                          1    DTXC1535

                                                                   jxs 03/07/12
                                                                         ir/jxs