This is the electric powered, radio controlled, 1/10 scale
                 Tamiya Super Hot Shot Off-Road Buggy Kit.

FEATURES: Chassis: ABS monocoque frame with plastic roll bar
          Drive: Four wheel shaft drive
          Motor: 25-T brushed with 13T pinion gear
          Electronic Speed Control: Tamiya TEU-104BK with reverse
          Suspension: Four wheel independent double wishbone
          Shocks: CVA, oil filled
          Gearboxes: Enclosed
          Bumper: Front, resin construction
          Ball Bearings: Full set
          Body: Clear polycarbonate
          Tires: Pin spike 3.3" (83mm) diameter, front width 1.1" (29mm),
            rear width 1.4" (36mm)
          Wheels: Two sets, gold plated plastic and lightweight white plastic
            wheels*
            *TAMC3569 Clamp Type 6mm Aluminum Wheel Hubs are required to attach
            the lightweight white plastic wheels (standard resin hubs can also
            be used)
            Dimensions for both sets of wheels; 0.94" (24mm) wide front, 1.2"
            (30mm) wide rear, 2.05" (52mm) diameter front and rear
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Non-adjustable

INCLUDES: Tamiya Super Hot Shot Off-Road Buggy Kit with Motor, ESC, Tires,
            two sets of Wheels, Body, Rear Wing, Decals and Instructions

REQUIRES: Radio: 2-channel with high torque steering servo
          Battery: 6-cell 7.2V stick pack
          Battery Charger: To match selected battery
          Building and track equipment

SPECS:      Vehicle-
          Length: 15.3" (390mm)
          Width:   9.2" (235mm)
          Height:  5.9" (150mm)

COMMENTS: To paint body to match photos on box, order the following Tamiya
            colors,
            X-2 White, TAMR1502                XF-2 Flat White, TAMR1702
            X-11 Chrome Silver, TAMR1511       XF-15 Flat Flesh, TAMR1715
            XF-1 Flat Black, TAMR1701

          To upgrade to Ball Bearings use:
            Qty.  Size      Location               Qty.   Bearing Set
             2   5x11mm   Rear Drive Gear           1       DTXC1547
             1   5x8mm    Rear Bevel Gear           1       DTXC1523
             1   5x11mm   Rear Driveshaft Joint     1       DTXC1547
             1   5x11mm   Fr Counter Gear           1       DTXC1547
             1   5x8mm    Fr Counter Gear           1       DTXC1523
             1   5x11mm   Front Driveshaft Joint    1       DTXC1547
             4   5x11mm   Rear Uprights             2       DTXC1547
             4   5x11mm   Front Uprights            2       DTXC1547

                                                                   jxs 04/05/12
                                                                         ir/jxs