This is the Almost Ready to Fly K8B 6000mm Sailplane from Phoenix Models.

FEATURES: Construction: Balsa and plywood
          Wing: Bolt-on four-piece with carbon dihedral braces and aluminum
            joiner tubes
          Aileron Control: Dual servo
          Elevator Control: Dual servo
          Rudder Control: Dual servo
          Canopy: Clear plastic
          Cockpit: Dashboard detail with painted plastic pilot bust
          Covering: Oracover White #21010, and Ferrari Red #21023
          Landing Gear: Built into fuselage with one 4" (100mm) wheel
          Assembly Time: 2-4 hours

INCLUDES: Prebuilt Wing, Fuselage, and Tail Sections, Canopy, Wheel, Linkages,
            and Instruction Manual

REQUIRES: Radio: 6-channel with 6 1/4 scale high-torque servos, (2-ailerons,
            2-elevator, 2-rudder)
          Heavy Duty Servo Extensions: Two 40" and two 6" for aileron servos
                                       Two 40" for elevator servos
                                       Two 40" for rudder servos
          Battery Pack: No less than 6V, at least 3000mAh
          Building and field equipment

SPECS:    Wingspan: 236.22" (6000mm)
          Length:   110.24" (2800mm)
          Weight:   15.4 - 19.8lbs (7000g - 9000g)
          Airfoil: Semi-symmetrical
          Center of Gravity: (120mm) back from the leading edge of the wing at
            the fuselage
          Control Throws
           Aileron:  0.59" (15mm)
           Rudder:   2.7"  (70mm)
           Elevator: 0.59" (15mm)

                                                                   jxs 06/25/12
                                                                         ir/jxs