This is the Glow Powered, 2.4GHz Radio Controlled, 1/8 Scale, Ready to Run
                           WR8 3.0 Rally Car from HPI.

FEATURES: Chassis: 0.12" (3mm) thick natural finish aluminum with plastic side
            guards
          Drive: Four wheel shaft
          Radio: HPI TF-40 3-channel 2.4GHz with dual rate steering, all
            channel servo reverse and waterproof analog servo
          Engine: HPI Nitro Star 3.0 with pull starter, slide valve carburetor
            steel flywheel, foam air filter, and 2-shoe racing type clutch
          Exhaust: Aluminum tuned pipe
          Fuel Tank: 2.5oz (75cc)
          Differentials: Three, bevel gear type
          Shocks: Oil-filled, composite body with rear shock mud guards
          Brake: Two steel discs
          Suspension: Front and rear sway bars, composite lower suspension arms
            and solid upper links for easy adjustment
          Tires: Latitude Cross S1 gravel tires officially licensed by
            Michelin 1.24" (31.5mm) wide, 3.2" (82mm) diameter with Foam
            Inserts
          Wheels: White plastic 1.25" (33mm) wide, 1.9" (48mm) diameter, 12mm
            hex size
          Ball Bearings: Full set
          Body: Trimmed and painted white with all sponsor decals applied
          Bumper: Front foam with plastic raised skidplate that allows car to
            slide over objects in the road
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Non-Adjustable camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Warranty: 2-year limited through manufacturer, valid only in USA,
            Canada and South America

INCLUDES: HPI RTR WR8 3.0 Rally Car with 2.4GHz Radio, Steering Servo, Engine,
            8.4oz (250ml) Fuel Bottle, Eight AA Batteries, C-Battery, C-size
            Glow Starter, Painted Body and Instruction Manual

REQUIRES: Glow Fuel: car blend with 20-25% nitro content
          Filter Oil, Flat Blade Screwdriver, Track and Maintenance Equipment

SPECS:      Vehicle-
          Length:    19.1" (485mm)
          Width:      8.9" (227mm)
          Height:     6.8" (172mm)
          Wheelbase: 11.8" (300mm)
            Body-
          Length:    18.9" (480mm)
          Width:      8"   (203mm) behind front wheels, narrowest point
                      9.1" (232mm) at rear wheels, widest point
          Height:     6"   (153mm)

COMMENTS: For Replacement Ball Bearings use:
           Qty.  Size      Location              Qty     Bearing Set
            4   5x10mm     Front Hubs             2       DTXC1535
            4   5x8mm      Rear Hubs              2       DTXC1523
            2   5x11mm     Clutch                 1       DTXC1547
            6   10x15mm    Differentials          3       DTXC1595
            2   5x10mm     Front Diff Case        1       DTXC1535
            2   5x10mm     Rear Diff Case         1       DTXC1535

                                                                   jxs 06/06/12
                                                                         ir/jxs