This is Devcon's Plastic Welder with the Exclusive Applicator.|
A toughened structural adhesive formulated for bonding dissimilar
substrates as well as unprepared metals, ceramics, wood, concrete,
and standard thermoset plastics.
The final adhesive bond is designed to be load bearing and resistant
to weathering, humidity and wide temperature variations.
Use for household, industrial, crafts, or any job that requires
a high-strength, high-quality bond.
Best used on these materials:
Cream drying color.
Working time (the amount of time you have to apply the glue to your
surfaces. This includes the mixing time.): 4 minutes.
Handling time (the amount of time it takes for the glue to become
tacky. This is the period in which the surfaces should not be
repositioned or the glue smoothed out.): 15 minutes.
Full bond strength in 24 hours.
PSI strength: 3,500 pounds per square inch.
Working temperature range (once fully cured it can withstand this
temperature range): -40 degrees to +200 degrees fahrenheit.
The exclusive applicator features a patent pending design that makes
it easy to dispense and mix the right amount of adhesive for any
job. The snap off cap eliminates unsafe cutting of the tube ends
while the snap out paddle in the handle makes it easy to mix.
Nozzle design lets even the thickest materials flow easily.
Reseals for storage.
Directions on package.
One Plastic Welder with Applicator
Net Volume: 25ml
Not recommended above 200 degrees fahrenheit (93-C). Low temperatures
lengthen the set time. Does not bond to Polyethylene or Polypro-