This is the radio controlled, glow powered, Almost-Ready-to-Fly,
Tower Hobbies Trainer .60 MkII Airplane.
For Beginning Modelers/Fliers.
FEATURES: Construction: Balsa, plywood
Wings: All wood pre-covered, wing attaches to top of fuselage with
rubber bands, heavy duty plywood wing joiner
Covering: Factory applied high quality heat shrink film
Color Scheme: Consists of Blue applied diagonally on the forward
section of the wing and lower section of the fuselage. White
covers the aft wing and upper fuselage sections with Red and
Yellow stripes in between.
Radio Compartment: Easily accesible, plywood reinforced
Landing Gear: 5mm (.20") thick fixed wire with 4mm (.16") thick
steerable nosegear, tricycle style
Building Time: Ready to fly in several hours
Warranty Period: Tower Hobbies guarantees this kit free from defects
in both material and workmanship at the date of purchase.
This warranty does not cover any component parts damaged by use or
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent main landing gear, 2¾" (70mm) foam main and nose wheels
metal engine mount, 14.2oz (420cc) fuel tank, 2½" (63mm) white
spinner, wood servo trays and wing joiners, hardware package,
and photo-illustrated instructions.
REQUIRES: Engine: .61 cu in (7.5-10cc) 2-stroke
Muffler: Sports-style, engine mounts in an upright position, muffler
supplied with engine works fine
Radio: Four Channel
Servos: Four Standard (1-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)
(a high torque servo is suggested for the rudder, but not required)
Servo Extension: One, 6" (152mm)
Misc. Items: Fuel filter, propeller, building and field equipment
SPECS: Wingspan: 69.5" (1765mm)
Wing Area: 877 sq in (56.6sq dm)
Weight: 7.5lb (3400kg)
Wing Loading: 19.7 oz/sq ft (68g/sq dm)
Length: 57.25" (1455mm)
Airfoil: Flat Bottom High-Wing
Center of Gravity: 3-3/4" (95 mm) Back from the wing's leading edge
Control Throws- High Rate Low Rate
Elevator: Up & Down 5/8" (16mm) ½" (13mm)
Rudder: Right to Left ¾" (19mm) 5/8" (16mm)
Ailerons: Up & Down 5/8" (16mm) ½" (13mm)
COMMENTS: If a replacement fuel tank is needed, order the Sullivan 14oz
tank (SULQ1742), or the DuBro 14oz tank (DUBQ0214).
Some minor trimming and modifications may be required.
updt jxs 10/08/04
updt jxs 3/04/05