This is a motor mount drilled and tapped to fit O.S.
61SF, 61SF-P, 61RF, 61RF-P, 60FP, 61FX (2-stroke)
Includes all hardware necessary for mounting the engine to a firewall and to
mount an engine to the engine mount. The nose gear hole is not pre-drilled.
Four engine mounting screws (to secure the engine to the mount)-
Four lock washers (for the engine mounting screws)
Four blind nuts (they fit into the firewall)
Four motor mount screws (to secure the mount to the firewall)-
One L-wrench for the screws
Type of Material: All Aluminum mount with Steel screws and washers Type of Mount: Beam Style, Square Shaped Back Length: 78mm (3") Width: 45mm (1.77") Height: 45mm (1.77") Center Distance Between Firewall Mounting Holes: 46.6mm ** Distance from firewall to first engine mounting hole: 37mm
The firewall mounting holes are in a square configuration, so C.D.
dimension would apply to top and bottom and side to side. cmc 9/01
** updated ** cmc 05/12/05
– If you need more information, use these O.S. resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.