O.S. 12TG VII(P) Engine

Tower Stock# LXCBKY  •  Manufacturer Stock# 11192
O.S. 12TG VII(P) Engine (large view)
Quantity Discounts Available
Save $18.00
2 for $381.98
Notes from our tech department:
` This is the O.S. Max .12TG Ver. II On-Road R/C Vehicle Engine
with 12D2 Slide Valve Carburetor and without Pull Starter.
ROAR Legal.


ABL (Advanced Bi-metallic Liner) This process uses a double layer of
plating material rather than one thick layer. This helps the metal
bond to the cylinder and is more durable. Also, the plating process
is more consistent, resulting in a more precise fit between piston
and sleeve for better compression, longer life.
12D2 slide valve carburetor with thermo insulator
Two year warranty through Hobby Services beginning at date of


O.S. Max .12TG Ver. II engine, 12D2 Slide Valve Carb, #8 glow plug
Exhaust Sealing Ring and Instructions


Car Blend Fuel: 20% nitro
Air filter, electric starter and exhaust system depending on
Glow starter and track equipment


Displacement: 0.128 cu in (2.10cc)
Bore: 0.543" (13.8mm)
Stroke: 0.551" (14.0mm)
Practical RPM Range: 5000-30,000
Power Output: 0.7PS, 0.69HP @ 28,000rpm
Weight: 8.01oz (227g)
Crankshaft Size: UNEF 1/4-28
Distance between mounting holes same side: .43" (11mm)
Distance between mounting holes opposite side: 1.24" (31.4mm)
Distance/top of cyl.head to bottom of mounting flange: 2.88" (73.3mm)
Height/bottom of crankcase to top of cylinder head: 3.83" (97.5mm)
Width between mounting flanges: 1.53" (39mm)
Width of crankcase beneath mounting flanges: 1.00" (25.4mm)
Exhaust outlet, outer diameter: 0.55" (14mm)
Exhaust outlet, inner diameter: 0.39" (10mm)
Carb inlet, outer diameter: 0.63" (16mm)

Needle Settings: High Speed: 2.5 turns out from fully closed
Mixture Control (low speed): flush with ball link
Throttle Stop Screw: .5mm - 1mm open from fully


Some points on Slide Valve and Rotary carburetors-
Rotary carbs offer a larger response in the middle of the engine's
power band. This is desirable for off-road applications where
throttle response must be varied.
Slide Valve Carbs provide greater response at the beginning and end
of the power band. This works well for on-road and racing vehicles
demanding fast take-offs and high speed.

jxs 04/30/12
updt lmm 4/14/09

Easy RC: Engines
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐