This is the Radio Controlled, Glow Powered, 1/8 scale
                  DNX408V2 Buggy Kit from Team Durango.

FEATURES: Chassis: 0.20" (5mm) thick aluminum with black plastic side guards
          Drive: Four wheel shaft
          Engine Mount: Machined aluminum one-piece design accepts engines from
            every manufacturer
          Fuel Tank: Newly designed with pressure nipple relocated to the lid
            for more consistent pressurization, neck redesigned to more
            easily accept fuel guns for quicker pitting
          Body: Clear polycarbonate buggy body with black plastic rear wing
          Radio Box: Newly designed to separate battery and receiver
          Shocks: Aluminum body, oil-filled 15mm big bore, thicker diaphragms
            resist tearing
          Shock Towers: 0.24" (6mm) thick aluminum
          Brake: Piston pushes on exact center of brake pad and machined
            bulkheads and pad mounts result in zero flex
          Clutch; 3-shoe
          Wheels: White plastic 3.4" (87mm) diameter, 1.55" (39.5mm) wide
            17mm hex
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle

INCLUDES: DNX408V2 Buggy Kit with Body, Rear Wing, Wheels, Shock Oil, Diff Oil,
            Window Mask Sheet, Decal Sheet, Foam Air Filter and Instruction
            Manual

REQUIRES: Radio: 2-channel with high-torque steering servo
          Engine: .21 cu in (3.4 cc) buggy engine
          Tuned Pipe: For 1/8 scale buggy
          Tires: 1/8 scale buggy type w/foam inserts
          Receiver Battery: 6-cell flat NiMH or 2-cell LiPo/LiFe battery
          Battery Charger: Compatible with selected battery
          Building and track equipment

SPECS:      Vehicle-
          Length: 15.9" (405mm)
          Width: 11.9" (302mm)
          Wheelbase: 12.8 - 13.1" (325 - 333mm)
          Internal Gear Ratio: 3.31:1
          Weight: 123.45oz (3500g)
            Body-
          Length: 12.7" (322mm)
          Width: 6.4" (162mm)
          Height: 3.5" (90mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size         Location              Qty.     Bearing Set
             2   8x14mm flanged  Fr Diff              1        TDRC1320
             2   8x14mm flanged  Fr Diff              1        TDRC1320
             2   8x16mm          Rear Diff            1        DTXC1585
             2   8x16mm          Rear Diff            1        DTXC1585
             2   10x15mm         Mid Driveshaft       1        DTXC1595
             4   8x16mm          Rear Uprights        2        DTXC1585
             4   8x16mm          Front Uprights       2        DTXC1585
             4   6x10mm          Steering             2        DTXC1561
             2   5x10mm          Clutch               1        DTXC1535

                                                                   jxs 04/13/12
                                                                         ir/jxs