This is the Radio Controlled, Electric Powered,
              RR (Ready Built) Multiplex FunCub Trainer Airplane.
              Requires Transmitter, Receiver, Battery and Charger
                         For Beginner Modeler/Fliers.

FEATURES: Construction: Elapor foam white in color
          Wings: Two-piece all foam with plastic wing tube
          Aileron Control: Dual servo
          Flap Control: Dual servo
          Motor: Himax C 3516-0840 brushless
          Radio Compartment: Accessible under wing
          Landing Gear: Main, prebent fixed wire 0.087" (2.2mm) diameter,
            tailgear, prebent 0.039" (1mm) diameter wire
          Wheels: Main, two Elapor foam 4.75" (120mm), foam 2" (51mm)
            tailwheel
          Canopy: Elapor foam, detaches easily for battery access
          Decals: Peel and stick application with red and silver accents and
            black and gray window detail

INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all
            hardware, six servos, brushless motor, 13x4 propeller, 30A ESC,
            pre-bent 0.039" (1mm) wire landing gear, two 4.75" (120mm) main
            main wheels, 2" (51mm) tailwheel, plastic motor mount, two
            fiberglass wing spars, two decal sheets, photo-illustrated
            instructions and tow hook

REQUIRES: Battery: 2100-2500mAh LiPo
          Battery Connector Set: WSDM3001 if using battery listing in
            Accessory Guide, connector from ESC will have to be replaced
          Battery Charger: LiPo compatible with balancer
          Radio: At least 6-channel
          Misc. Items: Building and field equipment

SPECS:    Wingspan: 55.1" (1400mm)
          Wing Area: 588 sq in (38 sq dm)
          All Up Weight: 39.9oz  (1130g)
          Wing Loading: 9.8oz/sq in (30g/sq dm)
          Length: 38.6" (980mm)
          Airfoil: Flat bottom high-wing placement
          Center of Gravity: 3.1" (80mm) Back from the wing's leading edge
            at the fuselage
          Control Throws-
            Elevator: Up 0.59" (15mm), Down 0.47" (12mm)
            Rudder: Right to Left 0.59" (15mm)

COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
            the material using white or epoxy glue. Medium CA glue used with
            an activator is the only method of gluing recommended by the
            manufacturer.

                                                                   jxs 12/07/12
                                                                         ir/jxs