APC 20x8 Sport Propeller

Tower Stock# LXCGK5  •  Manufacturer Stock# LP20080
APC 20x8 Sport Propeller (large view)
Notes from our tech department:
This is One R/C Airplane 20x8 APC One Piece Sport Composite
Propeller by Landing Products.


APC props are manufactured using a pultrusion process. This method
causes the fiberglass "fibers" to be oriented axially in 1/2" long
pellets, allowing for a higher fiber (60%) to resin (nylon binder)
density. Providing substantially higher strength and stiffness than
glass filled nylon.
The additional stiffness is beneficial to control of vibration
resonance response.
The higher strength allows the use of thinner cross-sections,
beneficial to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.
Single piece propeller.


One APC Sport Propeller


ALL props require balancing (use TOPQ5700).
May need prop reamer, use GPMQ5006 (SAE) or GPMQ5007 (Metric).
9/32" + 5/16" Tubing for Bushing


Prop Diameter: 20"
Prop Pitch: 8
Hub Thickness: 0.50"
Hub Diameter: .9"
Weight: 0.045lbs
Engine Shaft Diameter: 1/4"

‐ Mailing Address ‐
‐ Additional Contact Information ‐