This is the Brushless Electric Powered, 2.4GHz Radio Controlled, Tx-R|
Calypso Glider from Flyzone.
For beginning to experienced glider pilots.
This is the Tx-R (Transmitter Ready) version that includes servos,
an ESC and SLT receiver.
May be flown with any compatible transmitter with the
SLT (Secure Link Technology) system such as the Tactic TTX404, TACJ2404.
Construction: Aero-cell foam, white in color with green and black
Aileron Control: Dual servo with flap option (SEE COMMENTS)
Motor: Brushless outrunner
Electronic Speed Control: 18A
Servos: Four micro (2-ailerons, 1-rudder, 1-elevator)
Battery: 11.1V15C 1300mAh LiPo
Battery Charger: 12V DC powered balancing charger with two LEDs to
indicate charge status (for AC Adapter, order GPMM3310)
Battery Compartment: Located under canopy
Landing Gear: Landing wheel with nose and tail skid plates
Warranty: Flyzone guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.
Flyzone Calypso Glider with 4-ch SLT Micro RX, ESC, Motor, Folding
Prop, Flight Battery, DC Battery Charger, 3 Servos and Instruction
Compatible with SLT transmitter with at least 4 channels
Wingspan: 73" (1855mm)
Wing Area: 526 sq in (33.9 sq dm)
Length: 47" (1195mm)
RTF Weight: 29oz (820g)
Center of Gravity (CG): 1/4" (6.5mm) ahead of spar
Control Throws: High Rate Low Rate
Elevator, Up/Down: 3/4" (19mm) 18° 1/2" (13mm) 12°
Rudder, Right/Left: 1" (25mm) 19° 3/4" (19mm) 14°
Ailerons, Up/Down: 5/8" (16mm) 19° 3/8" (10mm) 11°
Flap: 7/8" (22mm) 22°
For optional flap installation you must purchase
FLZA6008 and use a minimum 5-channel
For optional flap installation you must upgrade to a minimum
5-channel radio system and purchase the following items;
Two Flap Servos, FLZA6013 (x2)
One Flap Linkage Set, FLZA6008
One Y-Harness for Flap Servos, FUTM4130
Two 6" (150mm) Servo Wire Extensions, HCAM2000