This is the Team DuraTrax I-Speed 12 Turn Modified|
Forward and Reverse Electronic Speed Control with a Futaba J connector.
FOR MODIFIED BRUSHED MOTORS DOWN TO 12 TURNS ONLY!
ABS Braking for better control in and out of corners, and adjustable
reverse-delay, reverse-lockout, and traction control.
*** 120 Day Limited Warranty ***
Forward and reverse and ABS braking
Excellent for intermediate to advanced racers
Easy pushbutton setup
ReverselLockout (see COMMENTS)
LED (Forward and Red-Full Speed, Red and Green-Reverse)
Pre-installed Futaba J connector
Pre-installed bullet yype connectors for motor
Standard (Tamiya Type) connector for battery pack
One I-Speed Forward/Reverse Electronic Speed Control with Futaba J
Connector and Bullet Motor Connectors.
Operating Frequency: 1.0kHz
Traction Control: 0.0, 0.1, or 0.2
Reverse Delay: 0.3 or 0.8
Maximum Continuous Current: 232A
Maximum Peak Current: 800A
Number of Cells: 6-7
Size with Heatsinks: 1.48 x 1.34 x .57 (42 x 28 x 16mm)
Weight with Heatsink: 2.44 oz (69g)
Connector: Motor: Bullet
Battery: Standard (Tamiya)
Motor: 12 Turn Modified
Wires: 14 gauge
Installing three .1 type capacitors onto motor with solder
Installing onto an electric vehicle
6 or 7 cell battery
Motor (12 Turn or Above)