This is the Opto-Isolated E-Switch with Futaba J connector.
     This is a Solid-State Replacement for a Servo and Switch combined.

FEATURES: Adjustable ON point, reversing switch and LED indicator.
          Optically isolated for no radio noise problems.
          Use as "Old Timer" ignition cut-off, Glo driver switch,
            Smoke pump control, or an On-Board Starter.
          High Current Switching Capability
          Selectable Stick Direction of ON/OFF
          Positive Switching Point with Hysteresis for No Switch Center
          Load Power Automatically Turns off when Receiver Power is Turned
            OFF.
          Works with AM, FM, and PCM radios.

INCLUDES:  One Opto-Isolated E-Switch with Futaba J connector.
           One 6-1/2" piece of solder.

REQUIRES:  Soldering wires with included instructions.

SPECS:    Length:    1.47" (37.5mm)
          Width:     1.56" (39.6mm)
          Height:    .75"  (19.1mm)
          Weight:    .7 oz (20g)

                                                                          ir/kh