Robart Fork Electric Retract Tail Wheel

Tower Stock# LXCKGH  •  Manufacturer Stock# 160WC-E
Robart Fork Electric Retract Tail Wheel (large view)
Notes from our tech department:
This is the Robart 160WC-E Scale Electric Tail Wheel Retract
with Fork and Cylinder.

FEATURES

Designed for large and giant scale model airplanes weighing up to
40lbs (18.1kg)
Electric actuator mounted to tailwheel frame
Robart type 2 motor
Steel and aluminum construction

INCLUDES

160WC-E Scale Electric Tail Wheel Retract with Fork and Cylinder
Instructions, Motor Connector

REQUIREMENTS

Robart extensions from control board to retracts;
IMPORTANT, Robart electric retracts use a non-standard plug and
require the use of proprietary Robart extensions instead of
standard servo extensions. Please use the stock numbers below to
order the proper extensions.
ROBM0177 177E12 12" ELC RTRCT SERVO EXT (qty 2)
ROBM0178 177E12S 12" ELC RTRCT SERVO EX (qty 1)
ROBM0179 177E24 24" ELC RTRCT SERVO EXT (qty 2)
ROBM0180 177E24S 24" ELC RTRCT SRVO EXT (qty 1)
*Note: The receiver and auxiliary battery inputs on the control
board use standard servo plugs.

Robart #177 Electric Retract Control Unit
Tail Wheel 2" (51mm) diameter or smaller

SPECIFICATIONS

Axle Width: 1" (25.5mm)
Length from Tailwheel Frame to center of Axle: 3.7" (95mm)
Width of Tailwheel Frame: 1.97" (50mm)
Height of Tailwheel Frame: 2.7" (69.5mm)

jxs 01/18/13
ir/jxs
updt jxs 06/09/14

Resources
‐ Mailing Address ‐
‐ Additional Contact Information ‐