This is the 2.4GHz Radio Controlled, Brushless Electric Powered
  RXR (Receiver Ready) Sensei Foam Trainer Airplane from Flyzone.
                  This version includes motor, ESC and servos.

FEATURES: Construction: Aero-Cell foam with "drop door" in fuselage to deploy
            a parachute or other creative payloads while in flight
          Wings: Two piece
          Aileron Control: Dual servo
          Tail Section: Attaches with one screw and features self-aligning
            stabilizer
          Motor: Brushless 1350Kv (FLZA6174)
          Electronic Speed Control: 30A brushless compatible
          Servos: Five micro
          Landing Gear: Main, prebent aluminum 0.098" (2.5mm) thick
          Wheels: Three foam 2.5" (63.5mm)
          Propeller: 10x5 plastic
          Spinner: 1.75" (45mm) diameter black plastic
          Warranty: Flyzone guarantees this kit to be free from defects in both
            material and workmanship at the date of purchase. This warranty
            does not cover any component parts damaged by use or modification.

INCLUDES: Sensei Foam Trainer Airplane with Motor ESC, five micro Servos, Prop,
            Spinner, Landing Gear, Wheels and Instruction Manual

REQUIRES: Transmitter/Receiver: 6-channel, TACJ2600
          AA Batteries: Four if using transmitter listed above
          LiPo Battery: 2100mAh 11.1V, FLZA6173
          Battery Charger: LiPo compatible w/balancing capability, GPMM3155
          Pliers and phillips screwdriver

SPECS:    Wingspan: 58" (1475mm)
          Wing Area: 566 sq in (36.5 sq dm)
          RTF Weight: 3.2lbs (1450g)
          Length: 48" (1220mm)
          Airfoil: Flat bottom
          Configuration: High wing
          Center of Gravity: Draw a mark 1/4" (7mm) back and 1/4" (7mm) forward
            from the front of the aileron servo cover. The plane should
            balance between these two marks.
          Control Throws:
            Elevator, Up/Down: 1/2" (15mm)
            Rudder, Right/Left: 5/8" (16mm)
            Ailerons, Up/Down: 1/2" (15mm)

                                                                   jxs 06/30/11
                                                                         ir/jxs