This is the 2.4GHz radio controlled, electric powered,
Flyzone Switch Trainer.
High wing mounting position offers stability for beginners
and is easily switchable to a more aerobatic low wing position
as beginners increase their flying skills.
This is the Tx-R (Transmitter Ready) version that includes servos,
an ESC and SLT receiver.
With the AnyLink SLT 2.4GHz Radio Adapter (TACJ2000) (separate purchase)
and the appropriate AnyLink cable
with compatible aircraft transmitter
4-channels or higher may be used to fly this airplane.
for full transmitter compatibility chart.
FEATURES: Construction: Aerocell foam
Wing: Two-piece with carbon wing joiner, can be mounted in either
a mid wing configuration or high-wing configuration with a
different canopy, plug and lock attachment
Aileron Control: Dual servo
Landing Gear: Main, prebent natural finish aluminum, 0.08" (2mm)
thick, 0.06" (1.5mm) tailwheel wire
Wheels: Foam, main 2.2" (55mm) diameter, 0.61" (15.5mm) tailwheel
Wheel Pants: Molded plastic
Cowl: Molded plastic
Electronic Speed Control: SuperTigre 30 amp
Receiver: Tactic 2.4GHz SLT
Spinner: Red plastic, 1.5" (39mm)
Motor: SuperTigre 10 outrunner brushless (SUPG8050)
Battery: SuperTigre 3S 11.1V LiPo
Battery Charger: ElectriFly LiPo with AC and DC adapters, (GPMM3318)
Propeller: 10x5 plastic
Warranty: Flyzone guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.
The Switch Trainer EP Success Guarantee guarantees that you will
successfully learn to fly with this aircraft with its wing mounted
in the trainer (high wing) configuration or Hobby Services will
replace it with your choice of a Flyzone trainer of up to equal
value. You must fly at an AMA chartered field with an AMA certified
instructor within 60 days of purchase date and provide a statement
about the crash and signature from the pilot and instructor. This
Success Guarantee is not valid if the plane was flown in the
mid wing configuration.
Replacement trainer kit options are limited to non symmetrical wing
trainer models available from Flyzone. Only one replacement kit per
customer. Valid in the U.S. and Canada only.
INCLUDES: Flyzone Switch Trainer with SLT receiver ESC, Motor, Battery, Servos,
Battery Charger, Propeller, Prop Adapter, Spinner, Instruction
Manual, High Wing and Low Wing Canopies
REQUIRES: Tactic AnyLink SLT 2.4GHz Radio Adapter (TACJ2000) to adapt aircraft
transmitter (the Futaba Square, TACM0001 and JR, Spektrum, TACM0002
are included with the AnyLink adapter)
*Tactic 2.4GHz 4 or 6 channel transmitters do not require the
Small slotted and phillips screwdrivers
SPECS: Length: 42" (1065mm)
Wingspan: 45" (1145mm)
Wing Loading: 14oz sq/in (43g sq/dm)
Weight: 2.5lbs (1130g)
Center of Gravity (CG): Between 2-7/16" (62mm) and 3-1/2" (89mm) from
the leading edge of each wing panel measured at the fuselage sides
Control Throws: Set at factory. If the control throws are changed
(not recommended) or to check the throws, use the following
Elevator: Up & Down 11/16" (17mm) 18°
Rudder: Right & Left 1-3/16" (30mm) 19°
Ailerons: Up & Down 7/16" (11mm) 16°
COMMENTS: If a replacement battery is needed, order FLZA6024
For plastic hardware repair parts use GPMA2942