Novak Impact Racing Brushless ESC w/X-Drive

Tower Stock# LXCLEV  •  Manufacturer Stock# 1730
Novak Impact Racing Brushless ESC w/X-Drive (large view)
Notes from our tech department:
This is the Novak Impact Racing Electronic Speed Control for Brushless Motors.

FEATURES

Meets ROAR Sportsman Class Racing specs
Ideal for all 1/10 scale 2WD on and off-road racing, 1/12 scale
racing, and popular 1S and 2S LiPo classes
Auto-detect LiPo battery protection circuitry reduces power as needed
to protect batteries from going below the safety voltage
Novak Super Tuner with multiple on-board adjustable settings
including;
Drive Tuning: Dynamic Timing Advance, RPM (Start/Final/Range)
Drive Frequency, and Minimum Drive
Brake Tuning: Brake Frequency, Drag Brake, and Minimum Brake
Additional Tuning: Deadband, Reverse Disable, and LiPo Protection
(On/Off)
NovaBrakes for instant braking under any condition
Novak X-Drive for enhanced throttle response, smooth power delivery,
higher top speeds, and cooler operating temperatures
Cooling fan with plug-in harness
Sensor based for excellent torque and low-speed drivability
On-board diagnostic temperature monitoring
Thermal overload protection circuitry
Water resistant case with protective silicone gasket
Gold-plated, direct-solder wiring tabs
On-board Hall Sensor Test verifies that motor's sensors are
working properly

INCLUDES

Novak Impact Brushless ESC with Heat Sink, 14GA Power Wires, Glitch
Buster, Cooling Fan, Double-Sided Mounting Tape and Instructions

SPECIFICATIONS

Input Cells: 1-2S LiPo / 4-6-cell NiMH (1S Booster Module (NOVC5477)
recommended if using 1S LiPo Battery)
Size: 1.15 x 0.95 x 0.79" (29 x 24.3 x 20mm)
Weight: 0.75oz (21.3g)
On-Resistance: 0.0004 ohms @ 25C trans temperature
Motor Compatiblilty: 540 size sensored brushless motor (2-pole)
BEC: 6.0V DC/2.0 amps
Wire Size: 14G Super-Flex Novak Silicone Wire

jxs 09/17/12
ir/jxs

Resources
‐ Mailing Address ‐
‐ Additional Contact Information ‐