This is the radio controlled, electric powered ready-to-run, 1/12 scale
       Ivan "Ironman" Stewart Edition Desert Mini-Trophy Truck from HPI.

FEATURES: Chassis: Nylon tub with inner roll cage
          Drive: Four wheel shaft with steel dogbones
          Radio: HPI TF-1 two channel AM with dual rates, steering and throttle
            trim and reverse, high torque steering servo
          Motor: HPI Firebolt 15 turn brushed
          Electronic Speed Control: HPI SC-15 with reverse
          Differential: Metal planetary gears
          Slipper Clutch: Adjustable for a variety of track conditions
          Spur Gear: Composite construction 87 tooth, 48 pitch
          Pinion Gear: Steel construction 18 tooth, 48 pitch
          Ball Bearings: Full set
          Shocks: Composite body, oil-filled
          Body: Officially authorized Toyota three piece pickup trimmed and
            painted truck body with two non-functional spare tires in bed of
            truck
          Suspension: 4-wheel independent with aluminum front and rear uprights
          Tires: Licensed Yokohama Geolander 1.3" (34mm) wide, 3.7" (94mm)
            diameter with foam inserts
          Wheels: Matte chrome finish 1" (26mm) wide, 2.2" (54mm) diameter
            12mm hex
          Bumpers: Front and rear skid plate type
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Non-adjustable, camber refers to the angle of the tops of
            the tires from vertical when viewed from front or behind vehicle
          Warranty: Two year limited through HPI beginning at date of purchase.
            Warranty valid only in the USA, Canada and South America.

INCLUDES: Ivan Stewart edition, RTR Desert Trophy Desert Truck, AM Radio, High
            Torque Steering Servo, Brushed Motor, ESC, Body, and Instruction
            Manual

REQUIRES: Battery: 6-cell NiMH stick pack with Standard connector
          Battery Charger: NiMH compatible, peak type
          AA Batteries: Eight for transmitter
          Maintenance and track equipment

SPECS:      Vehicle;
          Length:    21"    (533mm)
          Width:      9.2"    (233mm)
          Wheelbase: 12.3"  (312mm)
          Height:     6.25" (159mm)
            Body;
          Length:    18.5" (470mm)
          Width:      6.8" (174mm) behind front wheels, narrowest point
                      8.3" (210mm) at front fenders, widest point
          Height:     4.8" (123mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location               Qty.    Bearing Set
             2  10x15mm    Fr Uprights              1       DTXC1595
             2  5x11mm     Fr Uprights              1       DTXC1547
             2  5x11mm     Fr Diff                  1       DTXC1547
             2  5x11mm     Rear Diff                1       DTXC1547
             1  5x11mm     Spur Gear Assembly       1       DTXC1547
             1  10x15mm    Spur Gear Assembly       1       DTXC1595
             2  10x15mm    Rear Uprights            1       DTXC1595
             2  5x11mm     Rear Uprights            1       DTXC1547

          Available in the following 27MHz channels;
            A1, HPID87A1        A4, HPID87A4
            A2, HPID87A2        A5, HPID87A5
            A3, HPID87A3        A6, HPID87A6

                                                                   jxs 06/13/12
                                                                         ir/jxs