This is the Starter Box for the Associated Nitro TC3 and the|
RC10GT series of nitro powered vehicles.
Fits 1/10th and 1/8th scale on-or off-road vehicles with inline or
transverse mounted engines. Flywheel can be turned and reinstalled
at a 90°angle.
Adjustable posts and flywheel position allows starter box to be used
with different brands of vehicles.
High torque belt driven pulley reduction system.
Fully assembled, brushed Stainless Steel case with plastic carrying
One Starter Box for the Associated Nitro TC3 and RC10GT with motor,
and pre-installed standard connector, rubber flywheel, Y-connector
for two 6 cell batteries, alligator clip for 12V power, and
illustrated instruction manual.
Two 7.2V flat six cell battery packs, or 12V gel cell auto battery or
Motor: 775 size 10V-14V DC electric
Pulley Ratio: 4.307:1 (13 tooth pulley, 56 tooth spur pulley)
Length: 13.38" (340mm) not including handle
Width: 4.72" (120mm)
Weight: 64 oz (1800g) without batteries
Post Height: Front, .79" (20mm) Rear, .24" (6mm)