This is the glow powered, radio controlled, 1/8 scale
           Mugen MBX6TR Silver Graphite Version Off Road Truggy Kit.

                Includes the following Silver Graphite parts;
           M1201 Upper Plate               M1208 Front Upright Arms
           M1202 Center Diff Mount         M1209 Front Damper Stay
           M1204 Radio Tray                M1210 Rear Damper Stay
           M1205 Battery Holder

FEATURES: Chassis: A7075 T6 aluminum 0.12" (3mm) thick, gun metal gray in color
          Drive: Four wheel three differential shaft drive
          Shocks: Four oil filled aluminum body
          Shock Towers: 0.16" (4mm) thick silver graphite
          Gearbox: Sealed, front and rear
          Differentials: Planetary geared
          Fuel Tank: 5.1oz (150cc) low center of gravity design
          Transmission: Single-speed
          Ball Bearings: Full set
          Suspension: Pillow ball
          Body: Clear truggy type with molded black rear wing
          Clutch: 3-shoe aluminum
          Clutch Bell: 13 tooth steel
          Spur Gear: 46 tooth
          Camber Tie Rods: Adjustable, Camber describes the angle at which the
            tires sit vertically
          Steering Tie Rods: Adjustable, Caster/Toe-in is the angle at which
            the tires point inward as viewed from above
          Steering: Bell-crank type, with carbon graphite steering brace and
            adjustable Ackerman. Ackerman describes the effect of the inside
            front wheel turning faster than the outside front wheel during
            turns

INCLUDES: Mugen MBX6R Off Road Truggy Kit with clear truggy body, black
            plastic rear wing, decal sheet, window mask sheet, air filter,
            illustrated instruction manual

REQUIRES: Engine: .21 cu in rear exhaust
          Exhaust: Tuned pipe with manifold
          Radio: 2-channel with standard servo for throttle and high torque
            servo for steering
          Starter Box: For 1/8 scale truggy use
          Tires and Wheels: 1/8 scale truggy
          Building and track equipment

SPECS:      Vehicle
          Length: 22.2"  (565mm)
          Width:  17.04" (433mm)
          Wheelbase: 14.7 - 14.9" (373 - 378mm)
          Gear Ratio: 16.28:1
          Weight: 8.8lb (4,000g)
            Body-
          Length: 18.5"  (470mm)
          Width:   8.03" (204mm)
          Height:  4.8"  (122mm)

COMMENTS: For replacement Ball Bearings use:
            Qty.  Size      Location            Qty.  Bearing Set
             6   8x16mm    Fr/R/Center Diffs     3     DTXC1585
             4   8x16mm    Fr/R Gear Cases       2     DTXC1585
             2   8x16mm    Front Hubs            1     DTXC1585
             2   15x21mm   Front Hubs            1     ASCC6862
             2   8x16mm    Rear Hubs             1     DTXC1585
             2   15x21mm   Rear Hubs             1     ASCC6862
             2   5x10mm    Clutch Bell           1     DTXC1535

                                                                   jxs 07/24/12
                                                                         ir/jxs