This is the glow or electric powered, radio controlled, 1/8 scale
                    Ofna X3 Sabre Pro Off-Road Buggy Kit.
          **This version contains the Electric Conversion Kit.**

FEATURES: Chassis: 0.12" (3mm) thick 7075 aluminum lightened chassis with
            countersunk screw holes and 7075 CNC aluminum front and rear
            braces, composite stone guards and rear mud deflectors
          Electric Conversion Kit: Three hook and loop battery straps,
            5.9 x 2 x 0.67" (150 x 52 x 17mm) battery box holds a variety of
            2S-4S LiPo batteries, electric chassis, and motor mount
          Drive: Four wheel shaft, lightweight CVA drivetrain
          Ball Bearings: Full set
          Shocks: Version 2 aluminum body, oil-filled, two sets of springs
          Shock Towers: 0.20" (5mm) thick CNC aluminum
          Differentials: Oil-filled, bevel gear
          Engine Mounts: 7075 etched aluminum
          Exhaust: Chrome finish, EFRA approved 2080 one-piece tuned pipe and
            header
          Clutch: Three-shoe aluminum with 14 tooth steel clutch bell
          Fuel Tank: 4.2oz (125cc)
          Body: Clear polycarbonate, cab forward design, with high-impact
            downforce wing in white
          Brake: Side loaded caliper with 1.1" (27mm) fiberglass disc
          Steering: Ball bearing equipped with servo saver and adjustable
            Ackerman, Ackerman describes the effect of the inner front wheel
            rotating faster than the outer wheel during turns, 22° steering
            hubs
          Suspension: Full travel, front and rear sway bars, steel captured
            hinge pins
          Tires: Square and rectangular spikes, 4.2" (107mm) diameter, 1.69"
            (43mm) wide, foam inserts
          Wheels: White dish style, diameter: 3.31" (84mm), width 1.69" (43mm)
            hex size: .47" (17mm)
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to
            the chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle

INCLUDES: X3 Sabre Pro Off-Road Buggy Kit with Tires, Foam Inserts, Wheels,
            Tuned Pipe, Header, Shocks with extra set of Springs, Clear Body,
            Wing, Fuel Tank, Air Filter, Decals, Instruction Manual, Chassis
            for electric Motors, Motor Mount, Battery Box, Hook and Loop
            Battery Straps

REQUIRES: Radio: Two-channel with high torque servo
          Engine: .21 cu in (3.4cc) rear exhaust, non pull-start
          Receiver Battery: 5-cell 6V flat pack
          AA Batteries: Four or eight depending on transmitter
          Starter box, glow starter, glow fuel & building and track equipment

SPECS:      Vehicle-
          Length: 20.28" (515mm)
          Front Width: 12.1" (307mm)
          Rear Width: 11.9" (303mm)
          Height: 7.4" (188mm)
          Wheelbase: 12.6" (325mm)
          Weight: 7.27lbs (2721g)
            Body-
          Length: 14.5" (369mm)
          Width:   7.5" (190mm)
          Height:  3.8" (97mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty.   Bearing Set
             4   8x16mm    Fr & Rear Diff              2       DTXC1585
             1   8x16mm    Spur Gear                   1       DTXC1585
             2   5x8mm     Fr Gear Case                1       DTXC1523
             2   8x14mm    Fr Knuckle Arms             1       DTXC1583
             2   13x20mm   Fr Knuckle Arms              not carried
             2   8x14mm    Rear Knuckle Arms           1       DTXC1583
             2   13x20mm   Rear Knuckle Arms            not carried
             4   6x10mm    Steering                    2       DTXC1561
             2   5x11mm    Rear Gear Case              1       DTXC1547
             2   5x10mm    Clutch                      1       DTXC1535

                                                                   jxs 02/08/12
                                                                         ir/jxs