Novak Eiger ESC/Terra Claw Crawling Motor Combo 35T

Tower Stock# LXCNZZ  •  Manufacturer Stock# 3231
Novak Eiger ESC/Terra Claw Crawling Motor Combo 35T (large view)
Notes from our tech department:
This is the Novak Eiger 2S/3S Brushless and Brushed Electronic Speed Control
and 35 Turn Terra Claw Brushed Motor for Crawler Applications.

**This product is sold AS IS with no manufacturer warranty.**
**Return policy applies http://towerhobbies.com/policy-procedure.html.**

FEATURES

ESC (NOVM1835);
Additional motor wire to connect a 10.5 turn or higher brushless
motor for use with 2S LiPo packs
Compatible with 2-3S LiPo cells and 4-9 cell NiMH batteries (2S only
with brushless motor
Heavy duty 2-amp BEC
Three throttle modes;
Rock Crawl Mode with adjustable drag brake power
Standard/Basher Mode for normal FWD/BRK
Robotic or Servo Mode for FWD/REV operation only
Four adjustable parameters;
Brake Power/Throttle Mode (5 settings)
Dead Band (5 settings)
Drive Frequency (5 settings)
Voltage Cut-Off
One-Touch programming interface with four multi-colored status LEDs
6V output for cooling fan or other options such as running lights
Temperature monitoring allows user to check ESC operating temperature
at any time
Thermal overload protection to prevent overheating
Water-resistant case with silicone gasket seal
One touch setup
RoHS compliant

35 Turn Terra Claw Brushed Motor (NOVC3535):
Ideal motor upgrade for RTR crawlers
Provides a good balance of speed and torque and is best suited for
lighter weight crawling applications
Closed endbell design
Direct Solder Wiring Tabs

INCLUDES

Novak Eiger ESC with Gold Plated Bullet Motor Plugs, Mounting Tape,
Power Cap, Heat Sink, and 35 Turn Terra Claw Motor and
Instruction Manual

REQUIREMENTS

Installing in vehicle and connecting to battery and receiver

SPECIFICATIONS

ESC;
Input Cells: 2-3S LiPo or 4-9 NiMH
Size: 1.15 x 0.95 x 0.75" (29.0 x 24.3 x 20mm)
Weight: 0.75oz. (21.31g) without wires
On-Resistance: 0.0013 ohms
Motor Limit: 2S Brushed, 20T or higher, any 380 size
3S Brushed, 35T, any 380 size
2S Brushless, 10.5T or higher, any 380 size
BEC: 6V DC/2A
Wire Size: 14G Super-Flex Copper-Strand Silicone Wire
Motor;
Turns: 35
Input Voltage: 2S LiPo
Shaft Size: 1/8"
Dimensions (540 size): 2.08 x 1.41" (52.8 x 35.8mm)
Weight: 5.8oz (164g)

jxs 10/04/12
ir/jxs

Resources
Parts Compatibility
‐ Mailing Address ‐
‐ Additional Contact Information ‐