This is the electric powered, radio controlled, 1/8 scale
           Ready to Run RC8.2E Off-Road Buggy from Team Associated.

FEATURES: Chassis: 7075 hard anodized aluminum 0.14" (3.5mm) thick, with keyed
            lower suspension plates
          Drive: Four wheel shaft, Factory Team 7075 aluminum axles and center
            drives, 3.5mm light CVA drivetrain with full ball bearings
          Radio: XP 2.4GHz with high-torque S2008MG metal gear servo
          Motor: Reedy 2000kV brushless
          Electronic Speed Control: Waterproof XP SC1300-BL with Deans Ultra
            Plug connectors
          Motor Mount: Blue anodized aluminum
          Body: Trimmed RC8e buggy body, painted in either red or blue
          Differentials: Planetary gear
          Shocks: Oil-filled 16mm Big Bore, 6061 aluminum
          Shock Towers: 7075 aluminum 0.12" (3mm) thick
          Suspension: Updated RC8.2 racing suspension geometry
          Steering: Aluminum steering knuckles
          Ball Bearings: Full set included
          Wheels: Dish type, white in color 17mm hex, 1.6" (49mm) wide, 3.3"
            (83mm) diameter
          Tires: High traction knobby tread
          Caster: Adjustable with caster blocks that adjust 14, 16, or 18° with
            molded inserts, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
           tires from vertical when viewed from front or behind vehicle

INCLUDES: RTR RC8.2E Factory Team Off-Road Buggy with Brushless Motor, 2.4GHz
            Radio, ESC, Painted Body, Wrenches, Extra Servo Horns, Shock
            Spacers and Instruction Manual

REQUIRES: AA Batteries: Eight for transmitter
          Battery: 3S-4S LiPo pack
          Battery Charger: LiPo compatible
          Building and track equipment

SPECS:      Vehicle;
          Length: 18.5" (470mm)
          Width:  12"   (305mm)
          Wheelbase: 12.7" (323mm)
          Internal Gear Ratio: 4.30:1
          Weight: 8.07lbs (3661g)
            Body;
          Length: 14.6" (370mm)
          Width:   7.9" (200mm)
          Height:  4.4" (112mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty. Bearing Set
             2   8x16mm    Front Diff                  1    DTXC1585
             2   8x16mm    Center Diff                 1    DTXC1585
             2   8x16mm    Rear Diff                   1    DTXC1585
             2   8x16mm    Front Hubs                  1    DTXC1585
             2   15x21mm   Front Hubs                  1    DTXC1601
             2   8x16mm    Rear Bulkhead               1    DTXC1585
             2   8x16mm    Rear Hubs                   1    DTXC1585
             2   15x21mm   Rear Hubs                   1    DTXC1601

                                                                   jxs 10/25/11
                                                                         ir/jxs