DLE Engines DLE-60cc Twin Gasoline

Tower Stock# LXCPZB  •  Manufacturer Stock# DLE60
DLE Engines DLE-60cc Twin Gasoline (large view)
Easy Pay
Request 3 Payments of $183.33 Details
Money Saving Combos
 
LZ2300
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the DLE 60cc Twin Cylinder Gasoline Engine.

FEATURES; Horizontally opposed twin cylinders for low vibration operation
Aluminum alloy crankcase
Electronic ignition for simpler starts, higher performance and
minimal RF noise
Two year limited warranty through Hobby Services beginning at date
of purchase

INCLUDES

DLE 60cc Engine
Electronic ignition
NGK CM6 Spark plug
Two Pitts style mufflers
Engine stand-offs

REQUIREMENTS

Gasoline with at least 87 octane rating
2-cycle oil, mix ratio for this engine is 30 parts gas to one part
oil and must be followed exactly for warranty consideration
and optimum performance
4.8 - 12V battery for ignition
(separate receiver style pack can be used) (LiPo & LiFe requires
voltage regulator)
Propeller: 22x10, 23x8, 23x10, 24x8
Field equipment

SPECIFICATIONS

Displacement*: 61 cc (3.7 cu in)
Bore*: 1.42 in (36 mm)
Stroke: 1.18 in (30 mm)
Weight, engine: 4.37 lb (1.56 kg)
Weight, muffler: 2.82 oz./ 3.00 oz./(80 g/85 g)
Weight, ignition module: 7.44 oz. (211 g)
Output: 7.0 hp @ 8,500 RPM
Static Thrust: 15.2kg Pulling Force/100 meters altitude
13.5kg Pulling Force/1,800 meters altitude
Gasoline/Oil Mixture: 30:1
Gasoline Octane Rating: 87
Recommended Propellers: 22x10, 23x8, 23x10, 24x8
Carburetor Adjustments;
Low Speed Needle: 1.5 turns out as a starting point, adjust for a
smooth idle and a reliable transition to high throttle
High Speed Needle: 1.5 turns out from closed, adjust needle to peak
RPM, if engine slows or dies at full throttle, the high-speed
mixture is likely too lean
Muffler Length: 5" (128mm)
Muffler Diameter: 2" (50mm)
Exhaust Outlet Length: 3.4" (85.5mm)
Exhaust Outlet Diameter: 0.79" (20mm)
Distance Between Mounting Hole Centers Same Side: 2.7" (69mm)
Distance Between Mounting Hole Centers Opposite Side: 2.7" (69mm)
Width from Cylinder Head to Cylinder Head: 8.5" (215mm)

COMMENTS

*Note: The displacement and bore values have not yet been confirmed.

Order DLEQ0551 if a Propeller Drill Guide is needed
03.26.15 jml
7/11/12 pjw
jxs 09/24/12
ir/jxs

Resources
See Tower Catalog page 171.
Easy RC: Engines
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐