This is the 2.4GHZ radio controlled, brushless electric powered, 1/10 scale
RTR SC10 4x4 Pro Comp Trim Scheme Short Course Racing Truck from Associated
This version includes the #730 3000mAh LiPo Battery
and the #604 Reedy Balancing Charger
FEATURES: Chassis: Composite modular construction with low CG and Low Polar
Moment Design
Motor: Reedy 550 3500kV 4-pole brushless
Electronic Speed Control: Water resistant XP SC700 with cooling fan
and removable tray for easy clean up and maintenance
Radio: XP3-SS 2.4GHz 3-channel with S2008MG high-torque metal-gear
steering servo
Drive: Hybrid belt/gear drive, four wheel 5mm heavy duty belt system
with external tension adjustment, CVAs with captured drive pins
and heavy duty 6mm alloy axles
Slipper Clutch: Decoupled design allows front and rear wheels to slip
independently for greater traction and stability under bumpy
conditions
Differentials: Sealed, fluid filled, 32 pitch planetary gears
Battery: Reedy #730 3000mAh LiPo battery with Deans connector
ASCC0730
Battery Charger: Reedy #604 AC/DC powered balance charger, ASCP0604
Shocks: Oil-filled aluminum body 13mm big bore with low friction X-
ring seals
Body: Trimmed with the Pro Comp trim scheme driven by Travis Coyne
Receiver Box: Sealed, water resistant
Steering: Ball bearing with adjustable steering stops
Ball Bearings: Full set included
Wheels: 12mm hex drive KMC replica, black in color
Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm)
diameter, 1.7" (43mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
INCLUDES: RTR SC10 4x4 Short Course Racing Truck with painted Body, ESC,
Brushless Motor, 2.4GHz Radio w/Steering Servo
REQUIRES: AA Batteries: Four for transmitter
Building and track equipment
SPECS: Vehicle-
Length: 21.6" (550mm)
Width: 11.5" (293mm)
Weight: 6.1lbs (2775g) weight will vary slightly depending on
electronics used
Wheelbase: 12.9" (327mm)
Internal Gear Ratio: 2.57:1
Body-
Length 21.6" (550mm)
Width 11.5" (293mm) at front fenders, widest point
8.8" (224mm) at center section, narrowest point
Height: 6" (153mm)
COMMENTS: Available with the following race trimmed bodies;
ASCD9005, Lucas Oil driven by Carl Renezeder
ASCD9006 Pro Comp driven by Travis Coyne
ASCD9007 Rockstar/Makita driven by Kyle and Todd Leduc
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Transmission 1 DTXC1561
2 3/16 x 3/8" Transmission 1 DTXC1423
2 3/16 x 3/8" Idler Gear 1 DTXC1423
4 3/16 x 3/8" Rear Hubs 2 DTXC1423
4 3/16 x 3/8" Front Hubs 2 DTXC1423
jxs 08/27/12
ir/jxs
|