Eagle Tree Systems Guardian 2D/3D Airplane Stabilizer

Tower Stock# LXCUCV  •  Manufacturer Stock# GUARD-STAB
Eagle Tree Systems Guardian 2D/3D Airplane Stabilizer (large view)
Notes from our tech department:
This is the Eagle Tree Guardian 2D/3D Inertial Stabilizer
for Model Airplanes.


Smooths out air turbulence and provides true wing leveling capability
to help recover from lost orientation
Compatible with nearly all fixed wing models including gas, glow and
electric powered models including wings, foamies and sailplanes
2D flight mode helps beginning pilots return model to level flight
when needed, and helps compensate for windy conditions, imbalance,
poor aerodynamics, or high motor torque
3D flight mode makes control snappier for precision manuevers and
has two submodes for 3D flying;
In 3D Heading Lock submode the Guardian locks onto the present
attitude (pitch, roll, and heading) allowing easier stunt
In 3D Gyro submode the Guardian uses its built-in 3 axis gyro to
increase model's stability, reducing effects of gusts,
turbulence, motor torque, and other factors
May be tuned with a small screwdriver or set up on a PC with a USB
cable (not included)
Small size installs in fuselage and connects between receiver and
servos-no additional sensors or hardware to install


Guardian 2D/3D Inertial Stabilizer with Instructions and Connectors
for your Receiver and Servos


Input Voltage Range: 4.5-16V
Current Draw: Approximately 31mA
Dimensions: 1.62 x 0.86 x 0.42" (41 x 22 x 11mm)
Weight: 0.4oz (11g) including harness
Maximum Servo Current Capability: 5A

jxs 10/25/12
updt jxs 01/10/13

‐ Mailing Address ‐
‐ Additional Contact Information ‐