This is the electric powered, 2.4GHz radio controlled 1/10 scale, ready to run
                Raider Baja Buggy with Painted Body from Arrma.

FEATURES: Chassis: Aluminum 0.08" (2mm) thick matural finish with double
            chassis rails and alloy front chassis plate, batteries fit under
            chassis-no need to remove body to change batteries
          Drive: Rear wheel with steel driveshafts and axles
          Motor: 15 turn brushed
          Radio: ATX300 2.4GHz 3-channel with lightweight ARX300 receiver,
            transmitter can be converted for left or right hand use, seven
            position adjustable steering wheel, digital trim,
            servo reverse, end-point adjustment and failsafe
          Electronic Speed Control: Waterproof MEGA ESC with LiPo cutoff
          Battery: 1500mAh 6-Cell NiMH stick pack with standard connector
          Battery Charger: AC wall type
          Receiver Box: Splash and dust proof
          Body: Trimmed and painted "Warp" polycarbonate Baja buggy with black
            plastic rear wing
          Transmission: Metal gear, brushless ready
          Slipper Clutch: Machined alloy gears, adjustable for different track
            conditions
          Differential: Metal planetary gear, oil filled
          Suspension: Fully independent
          Shocks: Composite body, oil-filled
          Tires: dBoots Dunerunner with dBoots foam inserts
            Front, 1.2" (30mm) wide, 3.3" (85mm) diameter
            Rear,  1.6" (40.5mm) wide, 3.3" (85mm) diameter
          Wheels: Six spoke chrome, 12mm hex
            Front, 1.1" (29mm) wide, 2.2" (56mm) diameter
            Rear, 1.6" (41mm) wide, 2.2" (56mm) diameter
          Caster: Adjustable caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Bellcrank type with composite servo saver
          Warranty: Two year

INCLUDES: RTR Raider Baja Buggy with Painted Body and 2.4GHz Radio, ESC,
            Steering Servo, 15T Motor, Tires, Wheels, Foam Inserts, Decals and
            Instruction Manual

REQUIRES: AA Batteries: Four for transmitter
          Building and track equipment

SPECS:      Vehicle-
          Length: 15.7" (400mm)
          Width:   9.9" (252mm)
          Height:  5.5" (140mm)
          Wheelbase: 11.4" (290mm)
          Ride Height: 1.2" (30mm)
          Weight: 3lbs (1360g) without battery
            Body-
          Length: 10.1" (257mm)
          Width:   4.5" (114mm) at widest point
          Height:  3" (76.2mm)

COMMENTS: Available with the following body colors;
            Green, ARAD01GG
            Red, ARAD01RR
            Yellow, ARAD01YY

          If wanting to upgrade to a brushless motor, the Duratrax Element
            3900kV Brushless Power System (DTXC3122) is a ideal choice. The
            ESC fit is tight but can be achieved with patience.
          The stock 81 tooth 48 pitch spur gear can be used. A 48 pitch
            25T pinion gear (RRPC1025) is recommended.

          For replacement or to upgrade to ball bearings use:
            Qty.  Size      Location        Qty.      Bearing Set
             4  5x10mm     Fr Wheels         2         DTXC1535
             4  5x13mm     Rear Wheels       2         ARAC3201
             2  10x15mm    Diff Gear         1         DTXC1595
             4  5x10mm     Gearbox           2         DTXC1535

                                                                   jxs 09/24/12
                                                                         ir/jxs